The discussion of the Alien series of films and the props used in them is the aim, but if it's got Big Bugs and Big Guns, then they are welcome too!





Post new topic Reply to topic  [ 32 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: found a close match on the trigger lever on the smart gun
PostPosted: Sat Nov 30, 2019 2:15 am 

Service Number: A05/TQ2.0.32141E1
Country: United States
https://www.banggood.com/CNC-Short-Stun ... rehouse=CN

Apparently some recent google searches showed a close match on a left stunt clutch lever. Given the nature of the film, they would have had plenty of stunt clutch levers on hand as those parts would likely break during filming chase scenes, but the stunt aspect for Hollywood and chase scenes did not pick up until the 70s/80s any who.

_________________
The impossible takes a while longer and goes over budget too...


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Sat Nov 30, 2019 2:24 am 

Service Number: A05/TQ2.0.32141E1
Country: United States
I found a closer match.


https://www.amazon.com/Rzmmotor-Univers ... 1451074522

_________________
The impossible takes a while longer and goes over budget too...


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sat Nov 30, 2019 4:33 am 
Mobile Mayhem
User avatar

Location: Rapid View, Saskatchewan
Service Number: A10/TQ1.O.32157E1
Country: Canada
The clutch lever used was identified awhile ago by M56 Smart One as a Magura Short lever. They're harder to find as Magura doesn't make that style anymore so you have to get lucky on eBay and find a correct vintage one.


Below is a photo of mine (although it's bent slightly. I think it adds character :wink: )
Attachment:
Magura Lever 1.jpg
Magura Lever 1.jpg [ 1.72 MiB | Viewed 1820 times ]


Reference
Attachment:
Rear Grip Reference.jpg
Rear Grip Reference.jpg [ 19.51 KiB | Viewed 1820 times ]

_________________
Cpl. Melissa L. Klassen, ALG
AL Colonial Admin. - Sergeant at Arms (SgtA) -- 2019-2020
UACM (Canada) - Commanding Officer (CO) -- 2019-2020


Read the Aliens Legacy Charter for Rules & Regulations here: https://docs.google.com/document/d/1i3gd9QUyIqI_6rfk8kpxspbKU-JT4MBAjLPxfCkvGJ8


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Sat Nov 30, 2019 6:48 am 

Service Number: A05/TQ2.0.32141E1
Country: United States
At this point the stuff is so old, half the time, you only find things in museums.

I am finding I am having to find modern day equivalents just to get things affordably.

_________________
The impossible takes a while longer and goes over budget too...


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Sat Nov 30, 2019 4:46 pm 

Location: Colorado
Service Number: A05/TQ3.0.02118E1
Country: United States
I found one on eBay with the correct perch. I think it’s pretty close. I do like the bent one Moosh has. It does give it character!

2A73EDBA-C42E-4B53-A629-2D618737F4F5.jpeg
2A73EDBA-C42E-4B53-A629-2D618737F4F5.jpeg [ 108.65 KiB | Viewed 1788 times ]

Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Sat Nov 30, 2019 10:22 pm 

Service Number: A05/TQ2.0.32141E1
Country: United States
Indeed nice find indeed. I am trying to get something close. Then a minor alteration and wham, you are there. Then you are not breaking the bank as well.

_________________
The impossible takes a while longer and goes over budget too...


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Dec 01, 2019 5:39 pm 
THAT guy
User avatar

Location: Virginia
Service Number: A03/TQ2.0.02146E1
Country: United States
if you search "magura style lever" you see several affordable 'new' ones that are very close. They are chrome, but it is nothing some sanding and spray paint can't fix.


Top
 Profile  
Reply with quote  
 Post subject: Re:
PostPosted: Sun Dec 01, 2019 9:02 pm 

Service Number: A05/TQ2.0.32141E1
Country: United States
bigbisont wrote:
if you search "magura style lever" you see several affordable 'new' ones that are very close. They are chrome, but it is nothing some sanding and spray paint can't fix.


That is pretty much what I got.

_________________
The impossible takes a while longer and goes over budget too...


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Mon Dec 02, 2019 2:31 am 

Location: Wellywood, New Zealand.
Service Number: A10/TQ0.0.82146E1
Country: New Zealand
Moosh89 wrote:
The clutch lever used was identified awhile ago by M56 Smart One as a Magura Short lever.

Actually Moosh, the lever bit was more correctly identified by yourself, if I remember correctly. :D
Adam, did the hard yards on the perch, but his lever was off (and he's not posted a pic of the replacement lever he got yet).

knoxvilles_joker wrote:
At this point the stuff is so old, half the time, you only find things in museums.

As Terran said, there's still plenty of cheap levers on ebay. Perches are a bit more expensive, but you could opt to go with a modern / different brand perch fitting and modify the lever.

_________________
Cpl Aron "Septic" Williams
A10/TQ0.0.82146E1


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Mon Dec 02, 2019 5:13 am 
Mobile Mayhem
User avatar

Location: Rapid View, Saskatchewan
Service Number: A10/TQ1.O.32157E1
Country: Canada
septic wrote:
Moosh89 wrote:
The clutch lever used was identified awhile ago by M56 Smart One as a Magura Short lever.

Actually Moosh, the lever bit was more correctly identified by yourself, if I remember correctly. :D
Adam, did the hard yards on the perch, but his lever was off (and he's not posted a pic of the replacement lever he got yet).


Oh man, haha I forgot about that! To be fair, I'd still give Adam credit for it as he found out it was a Magura brand, which I didn't even know existed until I saw his post. I just got lucky and found out it was a "short" lever.

septic wrote:
knoxvilles_joker wrote:
At this point the stuff is so old, half the time, you only find things in museums.

As Terran said, there's still plenty of cheap levers on ebay. Perches are a bit more expensive, but you could opt to go with a modern / different brand perch fitting and modify the lever.


I did find a seller who has Magura brand levers but they're repros and slightly longer. They come with correct style perches but the listing is for 2, the brake and the clutch. The seller is open to splitting as I did ask recently. I don't know how many are available so that is why I'm refraining from linking.

Here's an excerpt from a reply I received:

Quote:
Measured in a straight line, the blade by itself is 6-1/2"/16cm

In the perch with cable adjuster, it measures 8-1/4"/20.5cm

Shipping to Canada would be $16 for one lever/perch and $20 for two lever sets.

BTW, the actual "vintage" Magura lever blades are polished forged aluminum, not black. We have those as well (we're Magura's biggest USA distributor).



Attachment:
Repro Magura Lever Perch.jpg
Repro Magura Lever Perch.jpg [ 145.33 KiB | Viewed 1699 times ]

Pictured above is the CLUTCH lever. The smartgun used the BRAKE lever (thanks Adam!)

_________________
Cpl. Melissa L. Klassen, ALG
AL Colonial Admin. - Sergeant at Arms (SgtA) -- 2019-2020
UACM (Canada) - Commanding Officer (CO) -- 2019-2020


Read the Aliens Legacy Charter for Rules & Regulations here: https://docs.google.com/document/d/1i3gd9QUyIqI_6rfk8kpxspbKU-JT4MBAjLPxfCkvGJ8


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Mon Dec 02, 2019 1:11 pm 
User avatar

Location: Germany
Now I'm curious - what is the difference between the brake lever and the clutch lever?

Cheers,
Stefan


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Mon Dec 02, 2019 4:41 pm 
Mobile Mayhem
User avatar

Location: Rapid View, Saskatchewan
Service Number: A10/TQ1.O.32157E1
Country: Canada
Bug Stomper wrote:
Now I'm curious - what is the difference between the brake lever and the clutch lever?

Cheers,
Stefan


As Adam pointed out - a small hole on the lever for (I assume) the brake line. You can see in the reference image and on my bent lever, the hole is present on the Magura logo. It could be argued both smartguns used a brake lever (Vasquez) and the clutch lever (Drake) since I haven't really scrutinized Drake's smartgun to verify this theory.

_________________
Cpl. Melissa L. Klassen, ALG
AL Colonial Admin. - Sergeant at Arms (SgtA) -- 2019-2020
UACM (Canada) - Commanding Officer (CO) -- 2019-2020


Read the Aliens Legacy Charter for Rules & Regulations here: https://docs.google.com/document/d/1i3gd9QUyIqI_6rfk8kpxspbKU-JT4MBAjLPxfCkvGJ8


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Mon Dec 02, 2019 5:25 pm 
User avatar

Location: Germany
Ah, I see!
So the general shape is the same.

Thanks
Stefan


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Wed Dec 04, 2019 6:45 pm 

Service Number: A05/TQ2.0.32141E1
Country: United States
Moosh89 wrote:
Bug Stomper wrote:
Now I'm curious - what is the difference between the brake lever and the clutch lever?

Cheers,
Stefan


As Adam pointed out - a small hole on the lever for (I assume) the brake line. You can see in the reference image and on my bent lever, the hole is present on the Magura logo. It could be argued both smartguns used a brake lever (Vasquez) and the clutch lever (Drake) since I haven't really scrutinized Drake's smartgun to verify this theory.


Who owns Drake's gun?

_________________
The impossible takes a while longer and goes over budget too...


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Wed Dec 04, 2019 9:48 pm 
THAT guy
User avatar

Location: Virginia
Service Number: A03/TQ2.0.02146E1
Country: United States
knoxvilles_joker wrote:
Who owns Drake's gun?


A collector who I guess wants to be anonymous. Adam documented having met him in his master thread, but names were purposefully left out. Not sure if that was the collector's request or simply a courtesy Adam put out there.

Side, note, the same guy also has the "tech manual" Pulse rifle. The wooden handle is quite distinctive. He lists it as "production made, but not screen used". I believe that is only half accurate. Parts were def screen used. I believe the main Thompson ser#s have been matched from the tech manual rifle to the primary "ideal 8" rifle featured in the main production photo. With all rifles having been disassembled after filming, then reassembled later, additional parts must have been added. As the reassembled alien 3 rifles show, end results were not exact. However the Thompson itself and probably most parts were very likely screen used. But that is a bit of a tangent. One hard core lucky collector is the point.


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Wed Dec 04, 2019 10:37 pm 
User avatar

Location: Southeast Pennsylvania
Service Number: A03/TQ1.0.52160G1
Country: United States
bigbisont wrote:
knoxvilles_joker wrote:
Who owns Drake's gun?


A collector who I guess wants to be anonymous. Adam documented having met him in his master thread, but names were purposefully left out. Not sure if that was the collector's request or simply a courtesy Adam put out there.

Side, note, the same guy also has the "tech manual" Pulse rifle. The wooden handle is quite distinctive. He lists it as "production made, but not screen used". I believe that is only half accurate. Parts were def screen used. I believe the main Thompson ser#s have been matched from the tech manual rifle to the primary "ideal 8" rifle featured in the main production photo. With all rifles having been disassembled after filming, then reassembled later, additional parts must have been added. As the reassembled alien 3 rifles show, end results were not exact. However the Thompson itself and probably most parts were very likely screen used. But that is a bit of a tangent. One hard core lucky collector is the point.


I thought Harry Harris had Drake's gun.

_________________
Image


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Wed Dec 04, 2019 11:03 pm 

Service Number: A05/TQ2.0.32141E1
Country: United States
I PM'd the owner per what was said.

_________________
The impossible takes a while longer and goes over budget too...


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Thu Dec 05, 2019 12:02 am 
Moderator & screen used
User avatar

Location: United Kingdom
Service Number: A08/TQ1.0.02136E1
Country: United Kingdom
TheSailingRabbit wrote:
I thought Harry Harris had Drake's gun.


Nope, I have a replica.

Harry

_________________
Image
http://www.facebook.com/TheHHACA - @TheHHACA


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Mon Jan 06, 2020 12:37 am 

Location: Colorado
Service Number: A05/TQ3.0.02118E1
Country: United States
Since reading this thread and Adam’s hero SmartGun build where he did a ton of research and discovered the Magura handle and perch. I’ve been on an obsessive search on eBay for the correct perch and handle. I think I got pretty close and acquired the short handle but not quite the correct perch until now. This one from eBay is from an 86 KTM 350 MXC. It has the two holes in the side as mentioned in Adams post but what I think is really cool is the Magura logo and Made in Germany on the top of the perch. Plus that it came off of a 1986 motorcycle. The short brake handle I bought previously that came from a Huskavarna fits perfectly in this perch. I put them on the SmartGun I got from Matsucorp, replacing the resin one. I love the way it looks now, with real parts on the SmartGun.

D7A6BFEB-593A-4527-8C70-5A26CB03FEC1.jpeg
D7A6BFEB-593A-4527-8C70-5A26CB03FEC1.jpeg [ 27.05 KiB | Viewed 1311 times ]

C130A6A0-A766-4378-A520-AF336627FC66.jpeg
C130A6A0-A766-4378-A520-AF336627FC66.jpeg [ 25.06 KiB | Viewed 1311 times ]

Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Mon Jan 06, 2020 11:21 pm 

Location: Colorado
Service Number: A05/TQ3.0.02118E1
Country: United States
I found these Huskavana Shorty brake and clutch levers on eBay the other day. Still in the package. I think this is a pretty good find as it has the part number and package is vintage NOS. One of the levers is definitely a little shorter than the other one in the package and I’m assuming it’s the brake lever.

9BA18052-66C8-48BB-8E4A-C56931140447.jpeg
9BA18052-66C8-48BB-8E4A-C56931140447.jpeg [ 93.96 KiB | Viewed 1287 times ]

Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Jan 07, 2020 9:56 pm 

Location: Wellywood, New Zealand.
Service Number: A10/TQ0.0.82146E1
Country: New Zealand
Nice, what's the length of the two levers (as measured from the centre of mount bolt to tip of ball)?

It's [read: I :D ] estimate that the correct lever is between 120mm-125mm long.

_________________
Cpl Aron "Septic" Williams
A10/TQ0.0.82146E1


Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Wed Jan 08, 2020 5:24 am 

Location: Colorado
Service Number: A05/TQ3.0.02118E1
Country: United States
With my only ruler that has a mm scale, it looks to measure out at 124mm

6D8F81DC-1492-4420-8902-E6FC5D78C6CB.jpeg
6D8F81DC-1492-4420-8902-E6FC5D78C6CB.jpeg [ 122.96 KiB | Viewed 1253 times ]

Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Wed Jan 08, 2020 5:27 am 

Location: Colorado
Service Number: A05/TQ3.0.02118E1
Country: United States
The other handle is 134mm

D25F751C-9C93-4D2A-A0E3-F51719EFAAF0.jpeg
D25F751C-9C93-4D2A-A0E3-F51719EFAAF0.jpeg [ 117.31 KiB | Viewed 1253 times ]

Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Wed Jan 08, 2020 5:46 am 

Location: Colorado
Service Number: A05/TQ3.0.02118E1
Country: United States
I removed the short handle I put on my SmartGun and placed it side by side with the one in the package and I was able to get a more accurate measurement and the short handle is 122mm

A4D6C2F8-D15A-4946-BC6C-37A74577BDBD.jpeg
A4D6C2F8-D15A-4946-BC6C-37A74577BDBD.jpeg [ 116.75 KiB | Viewed 1253 times ]

CDFC2DF2-844D-41CD-9761-2629FA91A5C0.jpeg
CDFC2DF2-844D-41CD-9761-2629FA91A5C0.jpeg [ 119.98 KiB | Viewed 1253 times ]

4450F7E3-03B0-4196-B204-82E567BB22E4.jpeg
4450F7E3-03B0-4196-B204-82E567BB22E4.jpeg [ 96.52 KiB | Viewed 1253 times ]

A69D38AE-99B3-48E2-A645-917A4B0BFBDB.jpeg
A69D38AE-99B3-48E2-A645-917A4B0BFBDB.jpeg [ 101.18 KiB | Viewed 1253 times ]

Top
 Profile  
Reply with quote  
 Post subject: Re: found a close match on the trigger lever on the smart gu
PostPosted: Sat Jan 11, 2020 5:24 pm 
User avatar

Location: Germany
Great find and top info!
Had a look at the stuff too and I noticed one detail that might be interesting (or not :wink: ):
There are Magura parts that marked with "... W-Germany" as well as parts that are marked "... Germany".
The "... Germany" parts were most probably produced after the German reunification (e.g. post 1990).

So to be super accurate you'd like parts that are labled "...W-Germany" as Aliens was produced before 1990.

Hope this helps.

Cheers,
Stefan


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 32 posts ]  Go to page 1, 2  Next



You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: