The discussion of the Alien series of films and the props used in them is the aim, but if it's got Big Bugs and Big Guns, then they are welcome too!





Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: who has modded the snow wolf rear shroud?
PostPosted: Mon Feb 12, 2018 8:14 pm 
User avatar

Location: glasgow uk
Service Number: A12/TQ0.0.52149E1
Country: United Kingdom
i'm pretty sure it was on here some one has modded a snow wolf shroud to be more accurate anyone know who or got links?

_________________
Reformed Pacifist


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Feb 12, 2018 8:39 pm 
User avatar

Location: devon, uk
Service Number: A11/TQ2.0.92142G1
Country: United Kingdom
Someone has on here before yeah. I was half way through mine till l hit a snag. Really need to crack back on with it!

_________________
Happy Happy, Joy Joy


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Feb 12, 2018 8:46 pm 

Location: Wellywood, New Zealand.
Service Number: A10/TQ0.0.82146E1
Country: New Zealand
Stimpy, do you wanna detail the snag please?
Reckon it'll be really interesting to see if others have had similar issues (& possibly cracked em).

_________________
Cpl Aron "Septic" Williams
A10/TQ0.0.82146E1


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Feb 12, 2018 8:55 pm 
THAT guy
User avatar

Location: Virginia
Service Number: A03/TQ2.0.02146E1
Country: United States
I modified mine pretty heavy.

The drawback is to get it as flat as it should be, you have to delete the stock's locking mechanism. You will need to figure out another way to hold the stock in place if you want to keep the 'adjustable' function. (I was outfitting these shrouds to fit the HCG thompson, so I didn't care about deleting the stock lock)

Attachment:
20150608_191041.jpg
20150608_191041.jpg [ 324.55 KiB | Viewed 1852 times ]


Attachment:
20150615_175248.jpg
20150615_175248.jpg [ 206.11 KiB | Viewed 1852 times ]


Attachment:
20180102_214253.jpg
20180102_214253.jpg [ 115.94 KiB | Viewed 1852 times ]


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Mon Feb 12, 2018 9:09 pm 
User avatar

Location: devon, uk
Service Number: A11/TQ2.0.92142G1
Country: United Kingdom
I swapped stocks for a sd studios stock and done the stock release button underneath mod. While the pr was stripped i went about rounding off the rear of the shroud which i used pvc pipe. Filled and smoothed it off nice with filler. When i went to test fit the shroud the stock button mod is on the outside of the shroud further towards the back of the pr.
After looking at screen used and hcg pr's ect it became apparent the shroud on the snow wolf is shorter at the rear. So i had to extend my shroud an thats as far as i got. I decided to build my armour instead!
Gonna get back at my pr as its pretty much done i just lost a bit of interest after that!

_________________
Happy Happy, Joy Joy


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Tue Feb 13, 2018 8:22 am 

Location: Wellywood, New Zealand.
Service Number: A10/TQ0.0.82146E1
Country: New Zealand
Nice one, cheers guys!

_________________
Cpl Aron "Septic" Williams
A10/TQ0.0.82146E1


Top
 Profile  
Reply with quote  
 Post subject: Re: who has modded the snow wolf rear shroud?
PostPosted: Tue Feb 13, 2018 11:25 pm 
And the running man home game
User avatar

Location: Los Angeles
Country: United States
I grafted a revised rear shroud via 3d print way back in 2005.


Could offer the files on shapeways.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Wed Feb 14, 2018 1:21 pm 
User avatar

Location: glasgow uk
Service Number: A12/TQ0.0.52149E1
Country: United Kingdom
I would be interested just order a 3d printer

_________________
Reformed Pacifist


Top
 Profile  
Reply with quote  
 Post subject: Re: who has modded the snow wolf rear shroud?
PostPosted: Wed Feb 21, 2018 6:42 pm 
And the running man home game
User avatar

Location: Los Angeles
Country: United States
Was recommended to look at Flashforge Inventor.

I'm used to commercial 40k+ machines, but these look like they can do the job.

Single Extruder machines won't work for me.


Top
 Profile  
Reply with quote  
 Post subject:
PostPosted: Sun Feb 25, 2018 11:00 am 
User avatar

Location: glasgow uk
Service Number: A12/TQ0.0.52149E1
Country: United Kingdom
i order a Creality3D CR - 10 3D Desktop DIY Printer for the money it seems to be good enough for my needs. you had a chance to put your file up?

_________________
Reformed Pacifist


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 



You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: