Quote:
Quote:Neophyl says the SPAS cage tapers toward the front.
When it's reversed to fit the PR, does the taper remain, making the muzzle end wider, or is the cage "adjusted"?
I can see how it'd be possible to do this with an airsoft SPAS, but not with a real cage. I've just never noticed that the PR forend gets bigger at the front. Mind you, I'm hopeless at details unless I'm specifically watching for something!
Hissing Sid...
[img]http://hooverae.com/upload/files/spas1.jpg[/img]
Notice how the top of the cage (A) slopes up at around point (B) into a higher plane of the cage (C)?:
[img]http://hooverae.com/upload/files/spas2.jpg[/img]
This is the taper that Neophyl was referring to. It is this transition from the lower level of the top of the cage up to the higher level that has most metal fabricators walk away from trying to duplcate the cage. The bend is simply to much trouble to reproduce.
It is also because of this tapering that we're all telling you that the Spas 12 receiver will
not fit into the Spas 12 cage. This is because the wider end of the cage is where the receiver connects. The narrower end of the cage where you are suggesting that the spas 12 receiver be insert is
entirely too narrow to fit in.
With respect, the vast majority of these questions can be answered if you take a
closer and
longer look at the reference pictures, of which, are all over the net. This is not to discourage you from asking questions, but to encourage you to do a
deeper analysis of the info
already available before you ask questions.
Edited by: [url=http://pub217.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=uscmcorps>uscmCorps[/url] at: 4/21/04 5:01 pm