Ok well the topic name says it all, we need help building the GA Smartgun kit im lookin at the pix that came with it and its a pain in the ass to read and is so screwie.Has anyone built one that can help out at all. Also if you can post pix of joining locations and also how you bolted it all together that would be a super big help.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

get one of those is my first reaction to anything golden armor.

post pics of it here and perhaps we can help? only thing i can think of.

_________________
the kilted smartgunner

Give me absenth I turn British.

well i can say we got it for 75 bucks so for a starter its not bad. if i spent the 350 or whatever they yeah i would be pissed. but its just looking at what should be the instructions its no way helping. i have figured out where some parts go but how some sit dont look right if you want pix of the parts all alone i could do that. just let me know. and 1 day we will own a pretty Matsuo M56 but till then we have this. and when i mean We its me and my wife.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

post em up! cant help if we cant see the problems!

_________________
the kilted smartgunner

Give me absenth I turn British.

lol will do. ok here are all the parts minus the charging handle that was broken so thats being epoxied right now. but the parts at the top no clue what they go to. minus the black tube thats the power cable . but i think i have all the parts laid out correct. and yes his casting work is so bad. and i know i have to carve out the drum mag so there is a grove to attach it to the main body.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

As much as I've heard about Golden Armor being THAT terrible....$75 would still be very tempting for a display piece.

_________________

ive got a Golden Armour SG, and with a little work its a perfectly useable bit of kit!

i fit real front struts, handgrip, charging handle, top cover and feed tray, ammo drum and replaced the rear grips with motorcycle parts.

if you need pics of how parts attatch, let me know and ill take some pics

_________________
M/SGT Rich Hyatt-Dowling (Retd)

UKCM Black ops

Skapunkninja that would be a great help. and yeah i was surfin Evilbay and some1 posted it for 55 bucks with 20 shiping. told the wife and she bought it since she wants to do a SG. So get a bad one will make getting a Matsuo later on THAT MUCH BETTER.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

I'm trying to figure out what those pieces would be but it's just not hitting me.

Maybe the hinge for the plate that would cover the ammo feed? The tube might be the wire that goes from the forward control handle to the underside of the SG right by the arm mount? But it (the tube) looks too thick to be that.

_________________
"Awww, someone tell me that's a boot!

It's a boot!"

III drops

yeah thats my thing i cant even tell if they are on the plans for the gun. like i said the instructions are just a break-down diogram of the gun. but it has been copied so many times its hard to tell. and i used to have to read thse to put gear back together when i did maintance so i shoud be able to read something like this easy. but other wise i think i have it laided out right. and teyin to figure out how the charging handle mounts. and with the drum mag if i have to carve into it to have a seat for the adapter.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer