Anyone ever tried modifying a Spulse Rifle so it has space for a Hyperdyne Labs counter and soundboard? I'm wondering if this might be viable with the new Spulse's spring-loaded trigger. Thanks in advance for your help and advice, guys.

_________________
Witty closing remarks have been replaced by massive head trauma and severe hemorrhaging.

It's designed to fit the Lightbender Counter. I've never had a Hyperdyne Counter, so I don't know if it will fit. If it's about the same size and shape as the Lightbender, it should.

As for a soundboard and speaker.... you're going to have to do some carving. Aside from inside the Magazine Well (where the batteries go), there's no hollow spots on the Spulse.

Hope that helps!

_________________
-Spat

I don't know about Lightbender but the Hyperdyne counter is 2"x2.5" and the soundboard is 1.5"x2". I was once the proud owner of an older model Spulse, so I'm well aware that I'll have to do some carving to make it fit. I was hoping some folks here might have tried it themselves and could share some helpful info on where/how they went about it.

Thanks for your input, Spat. I look forward to ordering one of your shiny new Spulse kits in the near future.

*edit* After checking up on it, I think I'd rather go with a Lightbender counter. It's smaller than Hyperdyne's.

_________________
Witty closing remarks have been replaced by massive head trauma and severe hemorrhaging.