Hello all!

I have been working nonstop on my new marine pep project. I have been using all of the "h1rg0n-Nobody" series of pep patterns. I managed to track them all down one by one, however I seem to be unable to find ONE of them, and a pretty important one at that. The back piece! It's the last piece I need to make, and I simply cannot find it. I found the filename is "h1rg0n-Nobody Back.pdo" and I've seen screenshots of it in Pepakura, but I am having no luck finding it. All my searching ultimately ends up with dead links on 4shared. Does anybody know where I can find this one file, and why it seems to be the only one that cannot be found online?

Also, I was curious about any positive/negative feedback regarding these particular patterns. They LOOK like the best ones I've seen, but I just wondering if anyone would suggest a different direction.

Here is my current build progress:


You can also see it all here on my FB album. I have made the album public, so hopefully anyone can see. Feel free to come friend me as well. I like staying in touch.

If I can find the back pattern, I plan to have it all ready to start with the resin this week sometime. Of course, I will be keeping my pictures updated as it all progresses.

Thanks to all for your time!

Here's the complete lot. The back file is in there.

http://dl.dropbox.com/u/16608101/Pepaku ... armour.rar

_________________
"You know, you blow up one sun and suddenly everyone expects you to walk on water."

Thanks for the quick reply, Mole! I took a look at the whole set here, and it is slightly different than the ones I have been using. I wonder how many different patterns are floating around out there.

The one I'm looking for looks more like this:


It has the indents along the torso edge for the straps and more angular recesses in the back. If I can't find this one, I can try to use the model you provided. Thank you! I appreciate the reply!

Give me your email address (pm it) and I'll send you the right one

_________________
AKA: Simon

Ah, I thought it was that one. I'm sure I've got that version somewhere but I can't find it at the moment.

_________________
"You know, you blow up one sun and suddenly everyone expects you to walk on water."

There on for forum on a post somewere as Nobody posted them up other week to I site that has HD and low res ones.

Gav

_________________
Cpl.
Smith,G 'Nogarth'

UKCM 13th Regt. 1st Batt. Freebooters
H.M.S. Valhalla

Sent it mate,
Check your spam folder, hotmail doesn't like me

_________________
AKA: Simon

Got it! Its the last one I needed. Thanks!

I had a question that comes a bit late in the process here, but still a curiosity. Whats the ideal build of someone for the default size of these h1rg0n-nobody peps? The more I build it and the more I look at it, the more it almost looks a little too big. But I guess I won't know until it's all done anyway. btw I'm approx 5'11" 34" waist.

I'm 5'8" and it's too small

_________________
AKA: Simon

Ha. Well then. Maybe my eyes are just shrinking from starting at all this paper.

With thanks to 88reaper88, I have completed phase 1 of my pep build (time for resin). I am a little nervous about how this is going to turn out, but theres no turning back now!

No problem mate

I've got the chest, right shoulder bits and ab pad parts done but I've now ran out if card!

Yours is looking great, I'll be watching this thread

_________________
AKA: Simon

this thread makes me want to make a set!

_________________
PFC Mike Rizzuto MVM
USS Blackhawk
3rd Batt 12th Regt

don't be nervous about the resin I was at first. but wizzed through it when I did chest. what I would do is if I did it again was resin the inside first before the out side as then the weight of resin on card won't bevel it like mine.

_________________
Cpl.
Smith,G 'Nogarth'

UKCM 13th Regt. 1st Batt. Freebooters
H.M.S. Valhalla

Gav Looking Fantastic mate, really is

_________________
What ya gonna do when I TECKNO HUG Youuuuu!!



Pvt.
STEAD,J "TECKNO VIKING"
A06/TQ1.0.22140E1

Skype: ulthur1

Jason that ain't mine :p ain't posted mine up yet as want to type the tutorial up first before posting.

gav

_________________
Cpl.
Smith,G 'Nogarth'

UKCM 13th Regt. 1st Batt. Freebooters
H.M.S. Valhalla

Quick update! I just finished the 2nd coat of resin on the outside. I'm a little high from the fumes.

Any input on an ideal number of coats for the front? Looks like I can probably work with 2, but I was curious what experience/suggestions others have.

id just say 2. i currently only have 1 layer on and fibreglassed the inside then gonna sand the outside and put 1 last layer on to smooth it off.

_________________
Cpl.
Smith,G 'Nogarth'

UKCM 13th Regt. 1st Batt. Freebooters
H.M.S. Valhalla

looking well mate

_________________
Hey, Hicks. Man, you look just like I feel.

Just finished the fiberglass. Man, my back is killing me! Time to relax!

Well its been a while since I've provided an update here! This armor build is coming along slowly. I'm just about ready to start the camo paint. Heres some pics of the progress it has taken!

Heres a primer coat


Black underside to avoid distracting bright colors at the joints


Silver coat to 'weather' down to


You can barely tell, but this is after I'd gotten all the rivet/belting holes drilled


Hope to have the camo done by next week sometime.
I look forward to having this done, and meeting up with hopefully some of you at coming cons this year!

Thanks for looking!

I'll have to give it to you dude. You've done an excellent job.
-Callum

_________________
Sgt C. Kee-McParlin
A05/TQ1.0.02160E1

13th Regt. 1st Batt. 'Freebooters'

Nice build!

Is it ok if I use those pep files as well? MAA is gone, and spat armor takes a long time to get, thinking of whipping up a set for Starfest in April.

Thanks much!