The discussion of the Alien series of films and the props used in them is the aim, but if it's got Big Bugs and Big Guns, then they are welcome too!





Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 26 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: A Study in Pulse Rifle Grips - REVISED AGAIN!
PostPosted: Mon Jul 17, 2006 5:41 am 
edit - july 22nd - Got some photos in from Sarge today, so the study just keeps on expanding. Very cool.

--------------------------------------------------------
EDIT - july 20th - thanks to some input from Alex I have revised the photo study to be accurate to what the GEM pulse rifle looks like. I also added two more photos to it, with thanks to everyone who's let me use photos! Thanks guys.

--------------------------------------------------------
Over the years I have noticed that no two pulse rifle makers (unless one is recasting the other) seem to have the exact grips.

The grips seem to vary wildly in some cases. I've always thought this was interesting (maybe I'm alone in that interest) and have been mulling over doing this little grip study for a long time.

I've worked on Spats, which has a comfortable grip, the Wilco, which I think is very comfortable, and the Icons, which I don't much care for.

I prefer the wider, fuller grips, such as the Gem and the MIM have. Now, both of these models are reputed to be recastings of SD pulse rifle, but don't seem to have the same grips. At least not in the comparison pics I have for reference.

The Rcroberts ebay classic (as I call it) also has a wide grip. Everything on that resin monster is wide though :)

I really like the look of Matt's new grip too.

Anyway, hope you guys enjoy my little "chart" here culled from years of saving reference photos of many prop makers work.

[img]http://www.propaholics.wolfchasers.com/uploader/users/Noeland/grip%20study3.jpg[/img]
Edited by: [url=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=noeland>Noeland[/url] at: 7/22/06 3:38 pm


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Mon Jul 17, 2006 8:52 am 
First of all, I'm not that interested in Pulse Rifles, but that's not what I wanted to say... DAMN well-done guide!!! Props to you for taking the time... I'm impressed even though I'm not, as I said, that interested in them :-)


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Mon Jul 17, 2006 1:31 pm 
What got me thinking....was what is the little notch on the base of the grip for??

But nice reasearch there NJ......I love that rc pic you have there ;)
[img]http://www.colonialmarines.net/Banner.jpg[/img]


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Mon Jul 17, 2006 1:51 pm 
hmm any chance of a frontiers grip ...to compare
[img]http://www.sibg06210.pwp.blueyonder.co.uk/images/09_03.gif[/img]

www.aliens.me..uk


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Mon Jul 17, 2006 2:57 pm 
Well, I don't have a marco posted, or a frontiers. Still working on those.:D

But hey, feel free to post your own pics and info, or email me the pics and I will revise the study and repost.

This is purely for fun and fans sake, not claiming any expertise here.;)


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Mon Jul 17, 2006 4:22 pm 
My Matsuo Grip should arrive today, thanks for the preview...
Nice job. I wish there were side by side reference pics of other items as well.
Image
What are you doing with a gun in space?


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Mon Jul 17, 2006 5:09 pm 
Noeland, you really need a hobby. Youve got way too much time on your hands:P :lol:



Derek


btw I happen to like my Icons handle..its learned to fit snug throughout the years. Got a Spulse coming from a trade. That ones getting metal upgrades:twisted:

Pvt.
D.Smith
A04/TQ1.0.62147E1


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Mon Jul 17, 2006 5:19 pm 
Excellent work, Noeland. I had been thinking of something similar but current projects take precedence. Color me very impressed with what you have done here. Well done, bud. :)
Tom
[img]http://www.m41a.com/z_temporary/octsig.jpg[/img]


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Mon Jul 17, 2006 5:47 pm 
Quote:
Quote:What got me thinking....was what is the little notch on the base of the grip for??


if it serves like modern grips, it's to keep your hand in place, ie a griped handle for better grip as you fire


pain can be avoided by not caring


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Mon Jul 17, 2006 10:01 pm 
I think he means the little nub at the bottom (not notch).

Retaining screw, yes?


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Tue Jul 18, 2006 3:53 am 
Quote:
Quote:Noeland, you really need a hobby.


The problem is that I have too many damn hobbies!!:lol:

And Tony do you mean the screw on the bottom of the grip, or the wilco grip with the thumb groove?

Tom - thank you (Derek please note how to be polite by Tom's example!) hahaha;)


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Tue Jul 18, 2006 3:56 am 
Aww...come on Noeland...you know where rowing the same boat together:lol:

btw, might have 2 new projects coming soon...might be cool to get together and discuss some things..



Derek
Pvt.
D.Smith
A04/TQ1.0.62147E1


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Tue Jul 18, 2006 4:03 am 
Sounds good Derek. I'll give you a call tomorrow.

I know sarcasm doesn't translate sometimes, but I knew what you meant. :P

Njc------------


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Tue Jul 18, 2006 4:32 am 
Just the little notch on the bottom of the grip.
Its not touching any part of the hand, its just there.

The RC has it and a few others including the screen used ones.
[img]http://www.colonialmarines.net/Banner.jpg[/img]


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Tue Jul 18, 2006 4:55 am 
I knew what you meant....you winked at me...remember??;)


Derek
Pvt.
D.Smith
A04/TQ1.0.62147E1


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Tue Jul 18, 2006 6:30 am 
Quote:
Quote:Just the little notch on the bottom of the grip.


Tony, what you're seeing there is the head of the rear grip screw. It sticks out like this because for the film they used the thompson wood grips, and machined away the shape of the grips to look like spas grips, and after that the screw head stuck out.

Here are some pics for clarification. (and Derek, before you make a comment, this took me all of 10 minutes to compile and setup in illustrator! PUNK! :P

[img]http://www.propaholics.wolfchasers.com/uploader/users/Noeland/thompson%20grip1.jpg[/img]
Edited by: [url=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=noeland>Noeland[/url] at: 7/17/06 11:30 pm


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - favorite?
PostPosted: Tue Jul 18, 2006 1:25 pm 
Got ya, thanks NJ.

Another mystery put to bed :)
[img]http://www.colonialmarines.net/Banner.jpg[/img]


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - REVISED and expanded
PostPosted: Fri Jul 21, 2006 3:37 am 
Noeland the PR with the "wood grips unknown origin" is the one from the Technical Manual; allegedly assembled from mostly original PR parts by Bapty several years after Aliens.

It was a comission for the owner of 'Fiction & Fantasy Models' back in the 90s.

No idea why the grip was left unfinished though.

Harry


<a href="http://www.harryharris.com/welcome.htm]<img src="http://www.triotech.demon.co.uk/hhacabanner.gif" border="0][/url]


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - REVISED and expanded
PostPosted: Fri Jul 21, 2006 5:35 am 
and my PR is not GEM, its also SD like the one above.

-joerg


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - REVISED and expanded
PostPosted: Fri Jul 21, 2006 8:14 am 
Joerg,
Thank you for pointing that out, I will revise and repost, I mistakenly used the wrong photo there! Sincerest apologies, thank you for not flaming me!

Harry,
Thank you for that info. I had no idea! I thought it was just a fan made PR.

Njc-----------


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - REVISED and expanded
PostPosted: Fri Jul 21, 2006 2:44 pm 
Nice work Noeland, it's always interesting to see comparisons of the take on different parts by different makers.
"How lucky are the few who know where they belong."
Image


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - REVISED and expanded
PostPosted: Fri Jul 21, 2006 3:09 pm 
Noeland- I sent you an email with some pics. Hope it helps. :)

Great work on this report! :D
Kevin

[img]http://groups.msn.com/_Secure/0TgDnAloXyJBkYBZV7s*Kj9!1Bc8b0FJ!WEmX8BpHJk8yRyABH697OsLy1Bm1knQrHcDDdHqDnRAmyoDB6vy6w!ASmCM57J8W6cyCxY8Y84TWwwCw7UVNAA/Burton%20004.JPG[/img]

"I know I'm human. And if you were all these things, then you'd just attack me right now, so some of you are still human. This thing doesn't want to show itself, it wants to hide inside an imitation. If it takes us over, then it has no more enemies, nobody left to kill it. And then it's won."


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - REVISED and expanded
PostPosted: Sat Jul 22, 2006 10:44 pm 
Thank you, and thank you for the pics you sent over. Had a rough couple of days. My dog is sick, and we may have to put her down.

This really breaks my heart because she's so smart and so strong, but she has siezures, and yesterday she had 9 of them, 3 of them after we left her for observation at the vets office. The meds don't seem to be helping her.

We're bringing her home today in the hopes they will stop, but if they don't, well, we'll have to let her go.

But, in any case, I want her to stop having siezures because they knock the crap out of her. She has the full on grand maul thrash around violent type.

So, it was nice to get back on the computer and concentrate on this for a little while :)


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - REVISED and expanded
PostPosted: Sun Jan 14, 2007 1:50 am 
Thought this was quite a handy reference for anyone buying an unknown origin PR.

I stopped this falling off the board. Can it be placed in the Archives?


Top
  
Reply with quote  
 Post subject: Re: A Study in Pulse Rifle Grips - REVISED and expanded
PostPosted: Sun Jan 14, 2007 2:01 am 
Quote:
Quote:I stopped this falling off the board. Can it be placed in the Archives?
Done! :)

Harry
[img]http://www.triotech.demon.co.uk/hhacabanner.gif[/img]


Top
  
Reply with quote  
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 26 posts ]  Go to page 1, 2  Next



You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: