You are welcome! I am curious to see how this turns out.

_________________
My entry-level prop and costume tutorials: viewtopic.php?f=3&t=12751

Hi all, once again I need to make a nuisance of myself. can I ask for some help with the marked dimensions please?



thanks

You are doing a great job!
Here are the measurements:

A = 21.8 mm
B = 5.0 mm

Cheers,
Stefan

Thanks Stefan. much appreciated. here is the latest with your measurements included. Still a lot to do and I can't really add much of the smoothing detail until it's nearly done. That's why some of the edges look really hard.

Looks great, nice one

Here is the latest. Lots to do yet unfortunately but it's coming on.

Hi all, in the home stretch now for this part of the model but can I ask for a check on this measurement please.

That's 14.6mm.

Cheers
Stefan

interesting, i'm a little out. mine is measuring in at around 11.5. oh well I can scale it up a bit. Thanks for your help

here's the latest. It's taking a while as i'm rebuilding from scratch to get the detail.

Daaamn! looks excellent!

Hi all, well i think that this is about as close as i'm going to get to this. I still need to work out the mechanical connection but it should just be a straight copy of the original in terms of how it'll work. I will finish it off and put it up on thingiverse as a work in progress until i've had time to print it.

Simply, wow! That's superb

thanks bud, BTW your con-safe knife build was great (i mean, as if the smartgun wasn't). I meant to drop a comment on it but haven't had time. I never have the patience to get the kind of finish you have but it's obviously worth doing.

Thanks mate. It was actually the easiest clean up I've had to do so far. Printed everything standing upright with a raft and minimal supports at 0.1 and then just a light sanding and undercoat.
I'll be putting it up on Thingiverse later, but apparently you have to wait 24 hours from signing up to do your first upload

Anyone printed this yet?
Seems large, and I'm trying to choose a good scale.
Gonna look back over the measurements in the previous posts and see if I can get it close.
Thanks again Martin!




EDIT: scaled everything to 82.46 here we go.

I'd wait until I upload the new version

Ah ok cool. Printer jammed anyway

yeah the new one is pretty accurately scaled against measurements from members here so will be loads closer in size to the original. I think the old one is about 20% larger than the original. I'm in the middle of a frantic week at work so far so i haven't been able to face looking at it today but i aim to get something up towards the end of the week. After that i'll update the smartgun battery as well

Hi all, the new belt tool is up on thingiverse

https://www.thingiverse.com/thing:4417006

DISCLAIMER. I haven't printed it myself yet so i don't know how well it fits together.

just as a bit of fun i rendered the old one against the new one and you can see how much bigger the old one is.



next steps will be to update the smartgun battery with the new model and of course to print the new one out. Hope that anyone who is interested can print and enjoy this.

cheers

Rich

hehehehehehehehehe (Thank you!)

A generous offer and some great work !
Looks indistinguishable.

Heres how I arranged things in Cura. printing now. 26hrs total.

hope it goes well. I've started printing the body today. It should be done in an hour or so and was looking pretty good so i'll post up a pic in a bit.

mixed results tonight. I obviously didn't add enough supports so the piece is warped.

on the plus side i think the detail is great and well on track for what is needed.