paradoxum wrote:
I took mine apart the other day so I could get easier access to the barrel shroud to attach some picatinny rails, here's some pics:
https://i.imgur.com/1Z98YfQ.jpghttps://i.imgur.com/gEFue85.jpgAnyway as I was putting it back together I noticed I'd lost a couple of tiny little rectangular 'nuts' that the screws of the metal plates screw into, does anyone know what size etc they are so I can get some more? absolutely can not find them anywhere. Might have hoovered them up.
The parts that these screws screw into:
https://i.imgur.com/Tttj7uu.jpgI didn't realize there were little metal nuts hidden inside the plastic, but alas I need more, what size etc are they / anyone got a quick ebay link for a pack of more?
Also, I'm pretty sure this screw was somewhere inside the gun but after re-assembly I was left with it and no idea where it goes:
https://i.imgur.com/oKkPhu0.jpg(the long black one)
Also this screw no longer screws into anything, did I lose another nut somewhere?
https://i.imgur.com/4HMwrMK.jpgThanks in advance.
The bolts that go in the magwell plates should be able to be found at any decent hardware store, even with the allen head. I actually found replacement screws and bolts for all of the peices on the gun in my local hardware store. I even changed the Philips head screws that keep the two peices of the shroud together near the carry handle to an appropriate sized allen head as well (which is screen accurate btw).
The self tapping screw that you showed is not any screw that I have seen in mine, unless it is the one that goes in the back half of the SPAS cage/grenade launcher, just under the shroud.
There is a metal fitting that has a nut/threading in it that the U clamp bolt screws imto the lower receiver with. Its SOP that the first time that you take the lower receiver off that you need to crazy glue that fitting/nut to the lower receiver. Yours has probably made its way loose, do you hear any rattling?