View unanswered posts | View active topics
Board index » Aliens Legacy Charter » The Ready Line
|
Page 1 of 1
|
[ 5 posts ] |
|
Author |
Message |
knoxvilles_joker
|
Post subject: Single servo and light plasma Cannon Posted: Fri Apr 13, 2018 3:40 pm |
|
Service Number: A05/TQ2.0.32141E1
Country: United States
|
Mocked up due to lack of time, money, and materials.
IMG_1156.JPG [ 335.81 KiB | Viewed 2022 times ]
_________________ The impossible takes a while longer and goes over budget too...
|
|
Top |
|
|
knoxvilles_joker
|
Post subject: Re: Single servo and light plasma Cannon Posted: Fri Apr 13, 2018 3:44 pm |
|
Service Number: A05/TQ2.0.32141E1
Country: United States
|
I ran out of steam last night to get the light added.
This is more of a space/motion mockup test fitting for Marble City Comic Con next weekend. By the end of the weekend I should know for sure whether or not this unit is stout enough for the next addition: a second servo for tilt functionality.
I am using a push button servo control board from sparkfun on this. Great in that it does not have to be programmed to work. You just set the potentiometers(POTS) add a push button switch and you are good to go.
I am adding this separately as this is a good showcase on what you can do if you have no knack for coding.
_________________ The impossible takes a while longer and goes over budget too...
|
|
Top |
|
|
knoxvilles_joker
|
Post subject: Re: Single servo and light plasma Cannon Posted: Mon Apr 16, 2018 9:46 pm |
|
Service Number: A05/TQ2.0.32141E1
Country: United States
|
OK basic build is done. And I would stress on the basic part. I will have to pull a late night just to get things done...
IMG_1164.JPG [ 259.77 KiB | Viewed 1957 times ]
IMG_1163.JPG [ 252.63 KiB | Viewed 1957 times ]
_________________ The impossible takes a while longer and goes over budget too...
|
|
Top |
|
|
knoxvilles_joker
|
Post subject: Posted: Mon Apr 23, 2018 2:55 pm |
|
Service Number: A05/TQ2.0.32141E1
Country: United States
|
OK the temporary setup worked OK. The hitech hg645 servos withstood abuse, the occasional knock. Wood was a great medium for housing the servos and brackets.
_________________ The impossible takes a while longer and goes over budget too...
|
|
Top |
|
|
knoxvilles_joker
|
Post subject: Re: Single servo and light plasma Cannon Posted: Wed Apr 25, 2018 4:54 pm |
|
Service Number: A05/TQ2.0.32141E1
Country: United States
|
_________________ The impossible takes a while longer and goes over budget too...
|
|
Top |
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Board index » Aliens Legacy Charter » The Ready Line
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|