The Aliens Legacy http://forum.alienslegacy.com/ |
|
Bronica lighter case patterns http://forum.alienslegacy.com/viewtopic.php?f=8&t=2296 |
Page 1 of 1 |
Author: | Bug Stomper [ Sat Jul 21, 2007 10:23 pm ] |
Post subject: | |
Now that's some nice work! If you need the instruction sheet too just look here: http://www.hooverae.com/upload/files/210707/2543507.jpeg http://www.hooverae.com/upload/files/210707/2619963.jpeg I did the scan with 300dpi, so when printed it should be 257x83 mm. Cheers, Stefan PS: On my lighter case the ring is located in front of the hook - not sure if this means anything though. |
Author: | Noble [ Sat Jul 21, 2007 10:48 pm ] |
Post subject: | |
Thanks! I've been needing instructions for awhile. Time to light it up. The split ring could be in the front or the back, I guess I forgot to bring it to the front. |
Author: | Dropshipbob [ Mon Jul 23, 2007 3:16 pm ] |
Post subject: | |
If someone needed a pouch for their lighter, you could use that pattern to make one out of craft foam. It's cheap, and all you need is glue, no stitching involved! |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |