Pretty off topic, but I wonder if anyone here can advise me on a broken guitar tube amp.

Its a 2x12 Traynor ycv80. Light turns on, everything works with headphones. no noise at all through the speakers.

I opened it up and it looks like a real idiot got inside of there. I've got the schematics, service manual ect. but am wondering if anyone in our group can offer any help.

If you have a multimeter it’s pretty easy to check if the speaker has blown (which is probably the case as your getting sound through the headphone jack.

https://m.youtube.com/watch?v=c3-15orvvLc

_________________
AKA: Simon

thanks , i guess I should, just doesnt seem likely sonce i never pushed it and theres 2 12's.
looking inside the amp i can see someone did some amateur work in there.

Maybe ping ID10T on the forums here - "I restore old stereo gear as well as design new stereo gear."

_________________
Cpl Aron "septic" Williams
A10/TQ0.0.82146E1

I saw this post but I don't think I can be of much help, or I would have already answered.

Basically, I consult the schematic, and verify voltages across the board, and where it deviates, replace the component most likely to be responsible. I can't say : "Just replace the hyperdrive motivator and it'll all be good" from over here, cuz it could be a hydrospanner too...

I'd need the amp, schematic and a large bag of small denomination unmarked bills for best results.

_________________
DON’T call me eighty-five.

Assistant Superintendent Leach,
Fiorina 161
"Serenity Through Confinement"