| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| Airsoft Mod question http://forum.alienslegacy.com/viewtopic.php?f=4&t=9704 |
Page 1 of 1 |
| Author: | Anubian [ Fri Mar 18, 2011 7:53 pm ] |
| Post subject: | Airsoft Mod question |
ok, i had a brain storm the other night i have a Muzzlelite mini 14 shroud for my T2 plasma rifle  i just got my hands on the laser scope they used and i was thinking....they don't make a mini 14 rifle for airsoft but useing a Famas,Aug, SA80 OR m14 or M4(only because the mini 14 uses M4 looking mags. do you guys think i can gut the AS gun and use them in the Shroud  size wise the shroud has a lot of room in it and a long time ago i saw some kinda mod with a AUG magazine in it ideals? |
|
| Author: | Russ Krook III [ Fri Mar 18, 2011 10:10 pm ] |
| Post subject: | Re: Airsoft Mod question |
Been there, thought about that.  The M-14 is Waaaaaay to big to use. It's about 1/2 inch too thick, as well as being too tall. The Mini-14 fires .223 while I believe the M-14 is .30 cal. The only airsoft replica that's been made has been the Mini .30 (which is closer, but still the wrong version). I wish they made a mini-14, as it was also used in the Starship Troopers Morita and the M590 rifle from Space: Above and Beyond. What rifle component is that you have pictured with the shell above? |
|
| Author: | Big Stew [ Fri Mar 18, 2011 11:31 pm ] |
| Post subject: | Re: Airsoft Mod question |
this is probably the closset you get bit of externail fabrication iyt would work http://shop.ehobbyasia.com/other-gun/ga ... rifle.html |
|
| Author: | Anubian [ Sat Mar 19, 2011 7:55 am ] |
| Post subject: | Re: Airsoft Mod question |
A ruger 10/22, the muzzlelite has various models but basically the same |
|
| Author: | Anubian [ Mon Mar 28, 2011 8:07 pm ] |
| Post subject: | Re: Airsoft Mod question |
i was on AS GI the other day and there is a new "Canada legeal" section and one is a FAMAS.....tempted.... |
|
| Author: | Russ Krook III [ Mon Mar 28, 2011 8:49 pm ] |
| Post subject: | Re: Airsoft Mod question |
The problem you're going to run into is you'll need to completely gut the AEG and transplant the guts into the new shell. This will require making custom mount points for the mechbox, feed tupe/hop up assembly, barrel and mag well. It's TOTALLY possible to do so, it will just need a bit of trial and error to get it done right. You'd scavenge the mechbox, mag well, hop up and inner barrel from the Famas and then work on placement. If you use M16 mags, you'll need to slightly modify them to work with the retention system of the Famas mag well. |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|