The Aliens Legacy
http://forum.alienslegacy.com/

who has modded the snow wolf rear shroud?
http://forum.alienslegacy.com/viewtopic.php?f=4&t=17348		 Page 1 of 1
Author:  Big Stew [ Mon Feb 12, 2018 8:14 pm ]
Post subject:  who has modded the snow wolf rear shroud?
i'm pretty sure it was on here some one has modded a snow wolf shroud to be more accurate anyone know who or got links?
Author:  stimpy [ Mon Feb 12, 2018 8:39 pm ]
Post subject: 
Someone has on here before yeah. I was half way through mine till l hit a snag. Really need to crack back on with it!
Author:  septic [ Mon Feb 12, 2018 8:46 pm ]
Post subject: 
Stimpy, do you wanna detail the snag please?
Reckon it'll be really interesting to see if others have had similar issues (& possibly cracked em).
Author:  bigbisont [ Mon Feb 12, 2018 8:55 pm ]
Post subject: 
I modified mine pretty heavy.

The drawback is to get it as flat as it should be, you have to delete the stock's locking mechanism. You will need to figure out another way to hold the stock in place if you want to keep the 'adjustable' function. (I was outfitting these shrouds to fit the HCG thompson, so I didn't care about deleting the stock lock)

Attachment:
20150608_191041.jpg
20150608_191041.jpg [ 324.55 KiB | Viewed 9132 times ]


Attachment:
20150615_175248.jpg
20150615_175248.jpg [ 206.11 KiB | Viewed 9132 times ]


Attachment:
20180102_214253.jpg
20180102_214253.jpg [ 115.94 KiB | Viewed 9132 times ]
Author:  stimpy [ Mon Feb 12, 2018 9:09 pm ]
Post subject: 
I swapped stocks for a sd studios stock and done the stock release button underneath mod. While the pr was stripped i went about rounding off the rear of the shroud which i used pvc pipe. Filled and smoothed it off nice with filler. When i went to test fit the shroud the stock button mod is on the outside of the shroud further towards the back of the pr.
After looking at screen used and hcg pr's ect it became apparent the shroud on the snow wolf is shorter at the rear. So i had to extend my shroud an thats as far as i got. I decided to build my armour instead!
Gonna get back at my pr as its pretty much done i just lost a bit of interest after that!
Author:  septic [ Tue Feb 13, 2018 8:22 am ]
Post subject: 
Nice one, cheers guys!
Author:  Noble [ Tue Feb 13, 2018 11:25 pm ]
Post subject:  Re: who has modded the snow wolf rear shroud?
I grafted a revised rear shroud via 3d print way back in 2005.


Could offer the files on shapeways.
Author:  Big Stew [ Wed Feb 14, 2018 1:21 pm ]
Post subject: 
I would be interested just order a 3d printer
Author:  Noble [ Wed Feb 21, 2018 6:42 pm ]
Post subject:  Re: who has modded the snow wolf rear shroud?
Was recommended to look at Flashforge Inventor.

I'm used to commercial 40k+ machines, but these look like they can do the job.

Single Extruder machines won't work for me.
Author:  Big Stew [ Sun Feb 25, 2018 11:00 am ]
Post subject: 
i order a Creality3D CR - 10 3D Desktop DIY Printer for the money it seems to be good enough for my needs. you had a chance to put your file up?
Author:  Erik_MAA [ Wed Jan 02, 2019 8:46 pm ]
Post subject: 
Waking this thread up: does anyone have links to the 3d files for this mod?
Author:  stimpy [ Sat Jan 05, 2019 3:32 pm ]
Post subject: 
Unfortunately i dont have a 3d file. As i commented on here when the project was just started nearly a year ago i thought i would show the now finished shroud.
I went down the same route as bigbisont and used styrene sheet an pvc pipe. Glued and screwed together then used a skim of filler on top.
Attachment:
20190105_140448.jpg
20190105_140448.jpg [ 979.4 KiB | Viewed 6086 times ]

Attachment:
20190105_140333.jpg
20190105_140333.jpg [ 951.57 KiB | Viewed 6086 times ]


As you can see in this pic where the shroud has been extended to a more accurate length and to allow for the stock lock button to be placed further back and underneath.
Attachment:
20190105_140714.jpg
20190105_140714.jpg [ 1.08 MiB | Viewed 6086 times ]
Author:  hirohawa [ Mon Apr 22, 2019 9:27 pm ]
Post subject: 
Looks great!
Author:  bigbisont [ Tue Apr 23, 2019 2:12 am ]
Post subject: 
Very nice indeed
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/