| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| Problem with counter on snow wolf PR http://forum.alienslegacy.com/viewtopic.php?f=4&t=16478 |
Page 1 of 1 |
| Author: | Damster117 [ Thu Oct 06, 2016 7:55 pm ] |
| Post subject: | Problem with counter on snow wolf PR |
My counter circuit has gone haywire! It counts up and down randomly when firing. Has anyone else had this problem? I don't know what to do with it I can't replace it, unless anyone has replaced theirs and has one spare? Hoping someone can help as it ain't a pulse if the ammo counter don't work! |
|
| Author: | Noble [ Fri Oct 07, 2016 4:43 am ] |
| Post subject: | Re: Problem with counter on snow wolf PR |
try just manually pushing a bb through the light gate, does it go haywire then? Or just semi, not full auto... |
|
| Author: | Damster117 [ Fri Oct 07, 2016 8:40 am ] |
| Post subject: | Re: Problem with counter on snow wolf PR |
it seems to count fine when I push a cleaning rod in an out of the barrel. Maybe it's because I wired it into the main battery? The voltage may be going up and down when the motor runs. It does it on semi and full auto. Maybe I should put a voltage regulator in. |
|
| Author: | Noble [ Fri Oct 07, 2016 10:46 pm ] |
| Post subject: | Re: Problem with counter on snow wolf PR |
Personally, I would keep them separate, and run the counter off a 9v bat or 3- 2032 coin batteries in series. |
|
| Author: | Damster117 [ Fri Oct 07, 2016 11:45 pm ] |
| Post subject: | Re: Problem with counter on snow wolf PR |
Yeah, probably a good idea. I only did it as the 9V is a bit vulnerable down there! |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|