The Aliens Legacy
http://forum.alienslegacy.com/

How to remove springs from King Arms Midcaps?
http://forum.alienslegacy.com/viewtopic.php?f=4&t=16419		 Page 1 of 1
Author:  Damster117 [ Wed Sep 07, 2016 4:27 pm ]
Post subject:  How to remove springs from King Arms Midcaps?
I'm looking to shorten my king arms mid caps to suit my snow wolf pulse but I can't seem to get the springs out. I've removed the pins but it didn't seem to help! Does anyone know how to get these out so I can cut them down?
Author:  Noble [ Wed Sep 07, 2016 7:36 pm ]
Post subject:  Re: How to remove springs from King Arms Midcaps?
I have a thread from 3 years ago in this section:

"8 midcaps with about 93 rounds each. That's not so good....."


The links are bad since imageshack started charging for their service.

I should have the images, let me upload them on to imgur.
Author:  Big Stew [ Thu Sep 08, 2016 5:28 pm ]
Post subject: 
should just be friction holding them in place.
Author:  Damster117 [ Fri Sep 09, 2016 11:47 pm ]
Post subject:  Re: How to remove springs from King Arms Midcaps?
Noble wrote:
I have a thread from 3 years ago in this section:

"8 midcaps with about 93 rounds each. That's not so good....."


The links are bad since imageshack started charging for their service.

I should have the images, let me upload them on to imgur.


Thanks Matt :) I saw the thread, but as you say the images are gone.

wildeone wrote:
should just be friction holding them in place.


Maybe I'm being thick, but the end caps seem to be mouldered in place. I'm probably going about this the wrong way!
Author:  Damster117 [ Sun Sep 18, 2016 10:17 am ]
Post subject: 
OK, so I've got the springs out now I just need to shorten the mags, and come up with something to use as mag stiffeners. May have to use styrene or something similar. I have access to a 3D printer now but I don't know how to model stuff so my attempt will be a lot less professional than Noble's!
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/