The Aliens Legacy
http://forum.alienslegacy.com/

Evike/Snow wolf SENSOR question (hook-up & function)
http://forum.alienslegacy.com/viewtopic.php?f=4&t=15635
Page 1 of 1

Author:  bigbisont [ Sun Aug 09, 2015 7:47 pm ]
Post subject:  Evike/Snow wolf SENSOR question (hook-up & function)

I removed the counter/display and sensor assembly from a snow wolf/evike pulse during one of my misadventures.

Now I am uncertain how to get it functional again. The item seems pretty straight forward except for the front sensor which I can't tell if it broke or if it is supposed to be this way.

Attachment:
20150809_134710.jpg
20150809_134710.jpg [ 358.75 KiB | Viewed 4672 times ]


Attachment:
20150809_134704.jpg
20150809_134704.jpg [ 168.2 KiB | Viewed 4672 times ]


Here is what I know:
-Prior to removing it, the counter only counted when movement was detected between the two clear nodes
-Everything powers on in its current state
-When I touch the silver wires from each node together in the middle, the counter counts down FAST. It does not appear to need the sensor to detect motion. I simply counts to zero very quickly.
-When the table the items are on bounces, it counts in chunks, even though the wires don't touch.

What I hope to learn:
-are the silver wires supposed to touch?
-If so where?
-If not, how can I ensure a correct (or even semi correct) count?

Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/