The discussion of the Alien series of films and the props used in them is the aim, but if it's got Big Bugs and Big Guns, then they are welcome too!

Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: Evike/Snow wolf SENSOR question (hook-up & function)
PostPosted: Sun Aug 09, 2015 7:47 pm 
THAT guy
User avatar

Location: Virginia
Service Number: A03/TQ2.0.02146E1
Country: United States
I removed the counter/display and sensor assembly from a snow wolf/evike pulse during one of my misadventures.

Now I am uncertain how to get it functional again. The item seems pretty straight forward except for the front sensor which I can't tell if it broke or if it is supposed to be this way.

20150809_134710.jpg [ 358.75 KiB | Viewed 3608 times ]

20150809_134704.jpg [ 168.2 KiB | Viewed 3608 times ]

Here is what I know:
-Prior to removing it, the counter only counted when movement was detected between the two clear nodes
-Everything powers on in its current state
-When I touch the silver wires from each node together in the middle, the counter counts down FAST. It does not appear to need the sensor to detect motion. I simply counts to zero very quickly.
-When the table the items are on bounces, it counts in chunks, even though the wires don't touch.

What I hope to learn:
-are the silver wires supposed to touch?
-If so where?
-If not, how can I ensure a correct (or even semi correct) count?

Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: