In for one!
Resistance to tyrants is obedience to God. - Thomas Jefferson
Moogus Aurelius-- Last of the Baric Emperors!
| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| G&P kit mag replacement part http://forum.alienslegacy.com/viewtopic.php?f=4&t=1467 |
Page 1 of 5 |
| Author: | Guest [ Fri Oct 07, 2005 2:07 pm ] |
| Post subject: | G&P kit mag replacement part |
I made this replacement for my G&P pulse rifle.<br>-----------------------------------------------------------<br><br><br><br> <p></p><i>Edited by: <A HREF=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=mnoble2>mnoble2</A> at: 6/28/07 9:46 pm<br></i> |
|
| Author: | barney five [ Fri Oct 07, 2005 5:59 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
i´m definitely in for two if thats ok ! thanks, -joerg |
|
| Author: | MENATARMS [ Fri Oct 07, 2005 6:39 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
Good stuff!;) [img]http://www.scifimilitary.com/MAA/SFMsig.jpg[/img] |
|
| Author: | uscmCorps [ Fri Oct 07, 2005 7:25 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
I'd be in for two. If you can get it down to $40 or less I'd be in for more. -Alex "The M41-A. When you absolutely, positively have to kill every mofo in the room. Accept no substitutes." |
|
| Author: | feide [ Fri Oct 07, 2005 11:23 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
I'd be in for 1. Mike |
|
| Author: | KerrSG1 [ Sat Oct 08, 2005 2:58 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
I'd be in for at LEAST 1, maybe 2, depending on the price for them. |
|
| Author: | moogybaby [ Sat Oct 08, 2005 11:18 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
In for one! Resistance to tyrants is obedience to God. - Thomas Jefferson Moogus Aurelius-- Last of the Baric Emperors!
|
|
| Author: | dropstation6 [ Tue Oct 11, 2005 7:58 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
Two for me, if you please. |
|
| Author: | KerrSG1 [ Thu Oct 13, 2005 11:54 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
People interested in 9 or 10 of these. Does it look like this will be a go? |
|
| Author: | Noble [ Fri Oct 14, 2005 1:48 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
The project is a go. I printed out enough mag tabs for 24 bases. I'm doing some minor revisions to mag base. I modified the height of the 9V counter battery in my M41A, so I want to make some internal adjustments, so you guys can use them without making any dremel changes to the top of the battery holder. If anyone has a G&P M41A assembled in the LA area, I would like to send you a preproduction sample for your evaluation. thanks. I should have them ready by mid Nov. |
|
| Author: | KerrSG1 [ Fri Oct 14, 2005 3:26 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
Great! I look forward to it! If I don't see a note about them being ready, please drop me a Private Message so I can send payment for one or two! |
|
| Author: | KerrSG1 [ Fri Oct 28, 2005 12:24 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
Sent payment for the two prototypes! Looking forward to them! |
|
| Author: | KerrSG1 [ Sat Nov 19, 2005 5:07 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
Hey, have you had a chance to ship the two prototype ones I paid for? |
|
| Author: | uscmCorps [ Sun Nov 20, 2005 8:21 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
I had no idea mnoble2 was even ready to take final orders!!! I'm still interested. -Alex "The M41-A. When you absolutely, positively have to kill every mofo in the room. Accept no substitutes." |
|
| Author: | Noble [ Sun Nov 27, 2005 11:12 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
Hey guys, I'm still making these. I've encountered some personal set backs these past two months, so I have not spent a lot of time on these. I sent two preproduction samples out to KerrSG1 this week. Hope he likes them. I have enough mag clips for around 20-25 bases, so I plan on at least making that many. Four new ones for me. I made many improvements to the ones I originally have. So, I will take pre orders on let's say 20 bases. Please send me a PM if you want some. I'm holding the limit for two per person for now,because of limited quantity. Also, please only PM me on one forum. It is confusing when posting an order here and the SFM. I plan on starting up this project again in Jan. Here's the list so far, If you're still interested. Aliens Legacy users- barneyfive-2 uscmcorps-2 fiede-1 moogybaby-1 dropstation6-2 www.hooverae.com/upload/pics/clips.jpg www.hooverae.com/upload/pics/mags.jpg |
|
| Author: | KerrSG1 [ Tue Nov 29, 2005 1:06 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
I got the two prototype ones today and they are FANTASTIC. They are very solid and the hi cap magazine slides perfectly into place. There is a slight adjustment I had to make on my PR, the battery edge was just tapping slightly against the edge of the mag bottom, but it 'slaps in' very well. The bottom leaves excellent access to the wheel to wind the spring in the mag. I'm not sure if there is anything that needs done to 'lock' the magazine and mag bottom together, but it's a pretty good pressure fit so it may not be necessary. Maybe a dab of glue but I'm not sure if that's even necessary. I'd rather not do a 'permanent' solution unless necessary. The color is pretty much dead on for the color of the G&P shroud color, so you can't really tell the difference of the materials. Overall, I'd say they are definately worth it if you want to switch out the crappy and loose mag bottom of your PR. Mine won't be in skirmishes, so I can't say how durable they will be, but they feel durable. I'm not sure what changes might have occurred between these two prototype ones, but if they have been improved upon since these two, then I'd say snatch some for your PR! Edit: On further inspection, under better light, the color is just SLIGHTLY off of the shroud color. It's not enough that it'd ever be an issue for me, but considering the shroud itself isn't supposed to be dead on accurate to the screen used Bess Brown color, I don't know that anyone else would care either. Edited by: [url=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=kerrsg1>KerrSG1[/url] at: 11/28/05 6:24 pm |
|
| Author: | feide [ Tue Nov 29, 2005 5:23 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
I am definately still interested. Feide (mike) |
|
| Author: | MENATARMS [ Tue Nov 29, 2005 7:53 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
Quote: Quote:but considering the shroud itself isn't supposed to be dead on accurate to the screen used Bess Brown color The G&P shroud color is no where close to being Brown Bess. Rather it is firmly in the olive green family. [img]http://www.scifimilitary.com/MAA/SFMsig.jpg[/img] |
|
| Author: | uscmCorps [ Tue Nov 29, 2005 10:55 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
mnoble2, I'm really curious to know what kind of Rapid Prototyping machine you use. I've never heard of a R/P machine outputting to ABS... colored ABS too! That's awesome!!! -Alex "The M41-A. When you absolutely, positively have to kill every mofo in the room. Accept no substitutes." |
|
| Author: | KerrSG1 [ Tue Nov 29, 2005 2:53 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
It's painted, I'm not sure what the ABS, or whatever plastic it is, color is. |
|
| Author: | Noble [ Tue Nov 29, 2005 6:00 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
The mags are printed from a Fuse Deposition Modeler (FDM). A company called Stratasys makes the machines. The abs comes in a few basic colors. I have black currently. As for the paint,I took a part from the G+P kit to a company called Finishmaster,(supplier to autobody shops) and had them color match it with a spectrometer.(fancy words eh) After all the finish work, (priming,filling,sanding,painting) I spray a clear dull coat. This gives a pretty close match between the injected plastic and a painted part. I didn't have to worry about this with my PR,because I cut out main sections of the shrouds and replaced them with FDM parts to make the kit more screen accurate. So, my shrouds are primed and painted. The result is a nice weathered look after skirmishing. Oh one more thing, It takes 6-7 hours to print one mag base, so it takes awhile to make them. |
|
| Author: | KerrSG1 [ Mon Dec 05, 2005 5:26 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
Here are some views of the Pulse Rifle with the magazine bottom I got recently. My extra bottom is waiting for a high cap magazine to come in. [img]http://home.comcast.net/~kerr345/alien/12-04-05-PulseRifleA.jpg[/img] [img]http://home.comcast.net/~kerr345/alien/12-04-05-PulseRifleB.jpg[/img] [img]http://home.comcast.net/~kerr345/alien/12-04-05-PulseRifleC.jpg[/img] [img]http://home.comcast.net/~kerr345/alien/12-04-05-PulseRifleD.jpg[/img] [img]http://home.comcast.net/~kerr345/alien/12-04-05-PulseRifleE.jpg[/img] [img]http://home.comcast.net/~kerr345/alien/12-04-05-PulseRifleF.jpg[/img] |
|
| Author: | uscmCorps [ Mon Dec 05, 2005 10:59 am ] |
| Post subject: | Re: G&P kit mag replacement part orders |
That looks super sweet!  mnoble, I don't have access to my work email so for the order info, please either send me a PM via the board (which I check everyday, or send me an email to my gmail account at: [url=mailto:uscmcorps@gmail.com]uscmcorps@gmail.com[/url] so I can paypal you the funds. Thanks! -Alex "The M41-A. When you absolutely, positively have to kill every mofo in the room. Accept no substitutes." |
|
| Author: | Friendlyskies [ Sun Dec 25, 2005 5:54 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
Hi New to the forum, just wondering if your still taking orders for these, they're fantastic, a perfect solution. Let me know how much they are and what the closing date for orders is (if it hasn't already passed of course). |
|
| Author: | dropstation6 [ Fri Jan 06, 2006 6:10 pm ] |
| Post subject: | Re: G&P kit mag replacement part orders |
Any ETA on when these will be ready to be formally ordered and shipped? Thanks in advance. |
|
| Page 1 of 5 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
