| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| Working Grenade Launcher. Really no joke. http://forum.alienslegacy.com/viewtopic.php?f=4&t=1297 |
Page 1 of 1 |
| Author: | Noble [ Fri Oct 07, 2005 2:49 pm ] |
| Post subject: | Working Grenade Launcher. Really no joke. |
Here are picts of my working grenade launcher on my heavily modified G&P kit. It is using a 27mm CAW grenade from a PEQ2 kit. Plus a altered remington 870 trigger assy. and many custom ABS and metal pieces I made. Someday I will have to document this whole thing properly. Here's a break down: 1. Front view. You can see the laser that is mounted in the rear of the barrel vent. Also, the bezel I made for the light gate to work with the Phil S. barrel triangle www.hooverae.com/upload/pics/gren1.jpg 2. Side view. The grenade and the battery underneath. I cut out all the vents of the cage and repositioned the slide connection of the pump. The cage is reinforced with brass extruded pieces inside for strength. www.hooverae.com/upload/pics/gren2.jpg 3. I real working allen bolt. Let's just say I did a lot of dremeling. This removes the block and grenade. www.hooverae.com/upload/pics/gren3.jpg 4. Here it comes out. www.hooverae.com/upload/pics/gren4.jpg 5. The grenade block collar with the Nades. www.hooverae.com/upload/pics/gren5.jpg 6. Custom collar I made with 1-1/8 steel pipe. Allen set screws on the side of the block lock it in place. www.hooverae.com/upload/pics/gren6.jpg 7. Internal view. This shows the mounting plate for the grenade. The firing pin is in the center. This is linked to the 870 trigger by a metal bar and modified trigger hammer. www.hooverae.com/upload/pics/gren7.jpg Finally posting some picts. I've had this thing done since May for OP lionclaw4. It is my only AS gun. Until I get my koba vp for my bday this month. It was tons of work, but I'm happy the way it turned out. |
|
| Author: | barney five [ Fri Oct 07, 2005 6:02 pm ] |
| Post subject: | Re: Working Grenade Launcher. Really no joke. |
oh man ! i cant believe it ! your G&P conversion is a dream ! incredible !!! -joerg |
|
| Author: | uscmCorps [ Fri Oct 07, 2005 6:08 pm ] |
| Post subject: | Re: Working Grenade Launcher. Really no joke. |
Wow... that is... really... really impressive!  Awesome job! So from the looks of your design, the pump has no function. And whenever you want to reload your grenade, you have to unbolt the front grenade block. Is this correct? Perhaps not the most tactical solution for under fire combat, but still a very cool design. Nicely done!  -Alex "The M41-A. When you absolutely, positively have to kill every mofo in the room. Accept no substitutes." |
|
| Author: | MENATARMS [ Fri Oct 07, 2005 6:41 pm ] |
| Post subject: | Re: Working Grenade Launcher. Really no joke. |
Very good stuff!  [img]http://www.scifimilitary.com/MAA/SFMsig.jpg[/img] |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
