Piece of piss to dismantle, dude
Allen keys and screwdrivers, IIRC?
It's basically a standard AEG with a factory-made body kit.
| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| Airsoft pulsie help! http://forum.alienslegacy.com/viewtopic.php?f=4&t=12581 |
Page 1 of 1 |
| Author: | Shaman [ Sat Feb 16, 2013 3:59 am ] |
| Post subject: | Airsoft pulsie help! |
Right, unsure where to chuck this, but i figured i might as well put it here. Anyway, since action hobbies has the twotone G&P clone... thing, they did a while back, for crazy cheap at the moment, i'm probably going to grab one to pop apart and repaint, plus strip the insides of everything dakka, since i have no intent to use it for such. What i'm curious about is, can anyone who has one tell me how tough the things are to take apart to the point where i can repaint the shroud? is it just going to be screws and tools, or is there anything filled in i'll have to drill out? Either way, it's not a big problem, but i'm curious as to how much hassle it'll be. Also, hi, haven't posted in yonks, some of you know me in varying degrees, 'tis kyle, white and red spiky mandalorian dude. Hoping to get more involved and aim to get a marine put together at some point in the grim darkness of the far future. |
|
| Author: | Scapey [ Sat Feb 16, 2013 4:18 am ] |
| Post subject: | |
Piece of piss to dismantle, dude Allen keys and screwdrivers, IIRC? It's basically a standard AEG with a factory-made body kit. |
|
| Author: | Shaman [ Sat Feb 16, 2013 4:25 am ] |
| Post subject: | |
Awesome, works for me then. Just checking the prebuild didn't do anything stupid like pump something gluelike over any of the screwholes. Long as i can get it taken apart, i can get it primed and airbrushed up nice. Cheers mate! |
|
| Author: | Scapey [ Sat Feb 16, 2013 5:08 am ] |
| Post subject: | |
I can check tomorrow, as Bolty should have his along to the Glasgow Game drop... but I don't think anything like that was done! |
|
| Author: | Shaman [ Sat Feb 16, 2013 5:46 am ] |
| Post subject: | |
Cool, let me know. Shall likely throw some money at the internet in the next few days regardless, but it'll be good to know what to expect. Have fun, too. been feckin ages since i trooped anything 
|
|
| Author: | PVB [ Sat Feb 16, 2013 11:57 am ] |
| Post subject: | Re: Airsoft pulsie help! |
If you want, check out my G&P assembly guide in my sig and work backwards.  
|
|
| Author: | Hyde [ Sat Feb 16, 2013 2:52 pm ] |
| Post subject: | Re: Airsoft pulsie help! |
what PVB said it worked for me
|
|
| Author: | Pike [ Sun Feb 17, 2013 10:46 am ] |
| Post subject: | |
Hi pips Just Joined the site I got the two tone snow wolf from action hobbies and it not the easiest thing to take apart but can be done. Once you got the screws out you need to pop the case apart which has 4 pins holding it together (thats the hard part), use a flat head screw driver to slowly pry apart. Then respray job done. As a airsoft gun I'm happy with it, mag change a pain mind you. |
|
| Author: | stimpy [ Sun Feb 17, 2013 2:25 pm ] |
| Post subject: | |
yeah, as pike said, i recently sprayed up my two tone and its pretty hard to get the shroud in half. there are metal pins located at all the main areas which are show in the manual it comes with. you will need some patients getting it apart but they are really strong and well made. a few times i was half expecting my shroud to snap but it held out. heres mine 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|