Hello all
What is the best way to attach the magazine base to the mag. Im using a cut down metal mag that has the winder wheel in it. Took out the pins that hold the mechanism inside and and was able to shorten the "guts" and still keep it functional. Any answers apreciated.

_________________
I may be synthetic, but im not stupid.

Have a chat with mr noble he used to sell mag base attachments

_________________
SSgt Kris "Bloodsucker" Kobus, VAS.
A09/TQ2.0.12136E1

What PR/shroud have you got?

Matt Noble did have two types, one part which works with the existing G&P kit mag base and one which replaced the base entirely, with a hole in the bottom to allow winding of the mag.

_________________
Steve
Corporal in 69th Regt. 1st Batt. Homer’s Heroes.

"I'd like to die at the age of 80 in my own bed, with a belly full of wine and a girl's mouth around my c**k."

I dont plan on doing any airsofting with it but I would like it to be functional. When I cut down the mag I left about a half inch extra. Im going to cut out a space in the mag base, then insert the mag to the proper length. Ill then put two screws(one on each side) in the mag base to hold it in. Ill see how it goes.

_________________
I may be synthetic, but im not stupid.

Wouldn't strong magnets work to hold the mag base in place? Has anybody done this?

The Short mag does not hit the bottom of the bag base.

You would have to make a spacer.


Here's how my mag solutions hold the mag:

The HCG has magnets which hold the battery holder mag, but they're not as secure as how Matt's bases slide onto the mag itself.

_________________
Steve
Corporal in 69th Regt. 1st Batt. Homer’s Heroes.

"I'd like to die at the age of 80 in my own bed, with a belly full of wine and a girl's mouth around my c**k."

Is this Noble Chap still making the mag base's? Me a mate would love a good few of em

Yes he does, and he has just finished making the snow wolf/matrix version

_________________
SSgt Kris "Bloodsucker" Kobus, VAS.
A09/TQ2.0.12136E1

Thanks will P.M him.

Noble i may have a few a few of these at the end of the month too, if you sent to the u.k that is. Can i just ask how that mag spacer part is held in to the bottom of the mag? thanks.

_________________
Happy Happy, Joy Joy

Are these mag inserts still around?

_________________
That's it man, game over man, game over! What the F*#@ are we gonna do now? What are we gonna do? Hudson, Aliens (1986)
Otherwise known as Jay

A04/TQ2.0.72145E1 Capt Constable, JM Violentj Otago-NZ

Hoorah to ashes!