| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| 3th pulse rifle in the making (update finished!!) http://forum.alienslegacy.com/viewtopic.php?f=3&t=3607 |
Page 1 of 3 |
| Author: | michellejordi [ Wed Feb 06, 2008 7:36 pm ] |
| Post subject: | 3th pulse rifle in the making (update finished!!) |
ammoclip release switch 
the spascage is made from an pvc pipe. i cut the pipe in half (in the lenght you now you get a C shape)heated up in the stoof untill its soft and rapid it around a wooden template. 
drill holes and with the dremel cut away pvc between the holes to make the vent.holes 
|
|
| Author: | michellejordi [ Sat Feb 16, 2008 9:59 am ] |
| Post subject: | 3th pulse rifle in the making(update 02-16-08) |
trigger part grenade launcher., yellow trigger +spring,red screw,bleu metal pin (nail) 
it works great the trigger springs back. the flat spring is made out of an piece pvc. what i bend a little. 
grenade launcher reload part closed,where the grenade shell comes out is open. 
and grenade reload part open,where the grenade shell comes out is now closed. |
|
| Author: | PVB [ Sat Feb 16, 2008 11:59 am ] |
| Post subject: | |
This is great. 
|
|
| Author: | PVB [ Sat Feb 16, 2008 11:59 am ] |
| Post subject: | |
Got this error when I posted: Quote: Could not obtain common word list
DEBUG MODE SQL Error : 1104 The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET SQL_MAX_JOIN_SIZE=# if the SELECT is okay SELECT word_id FROM phpbb_search_wordmatch GROUP BY word_id HAVING COUNT(word_id) > 17744 Line : 309 File : functions_search.php Then this second post appeared. 
|
|
| Author: | jeeves [ Sat Feb 16, 2008 5:52 pm ] |
| Post subject: | |
100% impressive work! 
|
|
| Author: | michellejordi [ Thu Feb 21, 2008 4:55 pm ] |
| Post subject: | |
oke this is what a have. all the templates where in inches. so i hat too chance them in too mm. |
|
| Author: | nick-a-tron [ Thu Feb 21, 2008 5:10 pm ] |
| Post subject: | |
wow that is impressive work michellejordi! are you going to scrachbuild everything or only the hard to find parts? |
|
| Author: | Jester [ Thu Feb 21, 2008 5:23 pm ] |
| Post subject: | |
thank you patrick very helpfull can you also include this measurement or pm me 
|
|
| Author: | michellejordi [ Thu Feb 21, 2008 5:29 pm ] |
| Post subject: | |
front 195 mm back 170 mm and yes everything will be build from scrab. |
|
| Author: | michellejordi [ Mon Mar 03, 2008 6:43 pm ] |
| Post subject: | |
some of you ask me,. how i formed the pvc pipes.well.... this is how i did it step 1. make some wooden molds for the spasscage and trianglevent. 
step 2. cut some pvc pipes of the right lenght ( i little longer then measured it shrinks when heated) cut the pipes in the lenght. 
step 3. put the piece of pipe in the stoof (220c) dont keep your eyes of the piece. it must be soft not burned. when it's soft take it out.and rappid it around the mold.for the spasscage i use an towel to push the pvc on the mold. 
for the pumpgrip i put an towel over the wooden mold. take the pvc out of the stoof lay it on the mold (with towel) and take another towel to push it in shape. 
for the trianglevent. take the piece of pvc out of the stoof lay it on a flat surface then lay the mold in the middle and push the sides of the pvc to the mold with flat wood. 
i hope this explanes it to you all. |
|
| Author: | nick-a-tron [ Mon Mar 03, 2008 7:09 pm ] |
| Post subject: | |
what a great technique! might have to try that myself. thanks for sharing 
|
|
| Author: | Jester [ Tue Mar 04, 2008 12:26 am ] |
| Post subject: | Hi patrick |
I borrowed your wooden former idea for my steel cage it works very well, did you ever find the measurement for your loading slot i did mine at 25mm wide 140mm long, same width as ejector port ,it makes sense to me,will you just use a single skin for the pump handle or do a double skin and carve the grooves in to give it a thicker look, i know that pvc is fairly easy to bond together,or you could do two skins and cut one into strips and bond them on ,instant grooves i wish you continued success with your build keep in touch mate 
|
|
| Author: | michellejordi [ Sun Mar 23, 2008 3:02 pm ] |
| Post subject: | |
the trangle vent.ready accept for the sling... ring???? 
the spasscage is ready...almost. 
|
|
| Author: | PVB [ Sun Mar 23, 2008 3:41 pm ] |
| Post subject: | |
michellejordi wrote: the trangle vent.ready accept for the sling... ring????
Depending how tough the vent is, you're probably looking for a plate staple shape like this: 
or similar, fixed to the end of the vent. Howver, if the vent is only plastic I doubt it would be strong enough to take the weight of the PR, so you may want to have it only for show, rather than use it. |
|
| Author: | SSgt Burton [ Sun Mar 23, 2008 3:47 pm ] |
| Post subject: | |
This is absolutely amazing work man!
|
|
| Author: | nick-a-tron [ Sun Mar 23, 2008 3:48 pm ] |
| Post subject: | |
|
oh my! this project just gets better and better. that vent and spas cage are just so awsome!! |
|
| Author: | michellejordi [ Sun Mar 23, 2008 4:13 pm ] |
| Post subject: | |
thanks guys for the comments. as for the sling RING!! i have build the same vent.before. for my second PR with the sling ring. and trust me it holds when i hold the PR by his sling. the vent.is made out of 3mm thick pvc pipe. And bolt to the spasscage. it didn't even bend when i hold it.pvc is strong men!!great stuff!! 
|
|
| Author: | Jester [ Mon Mar 24, 2008 12:29 am ] |
| Post subject: | well hard |
yo patrick knock out dude love the vent good idea with the double layer to get the square recess works realy well how'd you get the time to do that ,hows things your way ,ok i hope ,drop me a line mate let me know whats goin on ,all the best
|
|
| Author: | Dropshipbob [ Mon Mar 24, 2008 4:58 pm ] |
| Post subject: | |
Wowzers. Nice work!!!
|
|
| Author: | PVB [ Mon Mar 24, 2008 5:10 pm ] |
| Post subject: | |
michellejordi wrote: thanks guys for the comments.
as for the sling RING!! i have build the same vent.before. for my second PR with the sling ring. and trust me it holds when i hold the PR by his sling. the vent.is made out of 3mm thick pvc pipe. And bolt to the spasscage. it didn't even bend when i hold it.pvc is strong men!!great stuff!! Yeah, guess I was thinking about the weight of my G&P+TM M1A1 PR, rather than yours. 
|
|
| Author: | Wayne Ryder [ Tue Mar 25, 2008 6:33 pm ] |
| Post subject: | |
This is inspiring. Just one query, sorry if I've just missed a part that explains it: How did you get the broad, uniform groove down the Spas cage? |
|
| Author: | michellejordi [ Tue Mar 25, 2008 7:06 pm ] |
| Post subject: | |
hu... with an.....how do you call that thing.wait here is i pic.
http://www.capellemanmachines.be/Fotos%20trend/bovenfrees_trend_T5_kl.jpg this is done when the spasscage not has his final shape.you now on the top of the cage where the triangle vent. is attached.this was straight to lead the machine allong
|
|
| Author: | Wayne Ryder [ Tue Mar 25, 2008 7:14 pm ] |
| Post subject: | |
A router, then. That's why I couldn't figure it out, not owning one or ever having used one. Though I've seen what one does, I haven't seen a milling machine in the flesh either, but it's probably a safe bet that you've got your router set up to do exactly the same job. |
|
| Author: | michellejordi [ Tue Mar 25, 2008 9:08 pm ] |
| Post subject: | |
my first thought was to cut the spasscage. in the middle over the length.where to groof is.and gleu a plastic sheet behind it to get the groof dept.you now what i mean. |
|
| Author: | Wayne Ryder [ Wed Mar 26, 2008 12:36 pm ] |
| Post subject: | |
That's exactly what I would've done myself, same with the vent. |
|
| Page 1 of 3 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
