The current STL file format does not have any copyright restrictions or other DRM built-in to the file format and protocol. The stealing of forsale files or printing and resale without first contacting the file owner is akin to recasting. Recasting is a bannable offense on most all prop and replica fan forums. A best effort will be made to keep this list as accurate as possible, and notes added on any dimension change recomendations to increase film accuracy.

If using a file it is considered polite to inform the creator you are using it. This helps make it easier to run down IP theft cases. Etsy and thingiverse are rife with rip off copies of paid for files that are taken down as fast as they are put up there.

If you find a file please respond to this thread and we will append the first post so we have as complete a listing as possible.

These are free:
https://www.thingiverse.com/thing:4056653
Artist: MoeSizzlac

Matt Kauffman(smrtazzsmrtgnnr) has made a series of Aliens prop replica files including:
smartgunner headset
marine helmet camera
super siren housing for the shoulder lamp.
reflecta lamp housing for shoulder lamp

https://www.thingiverse.com/thing:1733311
Motion tracker by DrMoribus

https://www.thingiverse.com/thing:3696123
alien isolation motion tracker by introdg

Items by MartinR1000
https://www.thingiverse.com/thing:3593249
Smartgun
https://www.thingiverse.com/thing:4417006
USCM belt tool
https://www.thingiverse.com/thing:4310248
Aliens Smartgun battery pack

https://www.thingiverse.com/thing:3592028
Nostromo flamer unit by hotpretzel

https://www.thingiverse.com/thing:3779410
uss sulaco by Canison


These you pay for:
Laelle on therpf.com sells a wolf predator 3d printed set.

https://www.cgtrader.com/3d-print-model ... or-cosplay
alien isolation motion tracker by treekiller

https://www.etsy.com/listing/930464851/ ... on-replica
Alien resurrection gun by member buissonland

https://www.cgtrader.com/3d-print-model ... le-replica
Alien space suit helmet by JulianDanzer.
This is a large print and is only cost effective if you do at home yourself.

https://www.etsy.com/listing/778538135/ ... ch_click=1
alien isolation revolver by dreamofprops

BadKarma sells a print of the hand welder. Just post on the PX that you WTB:Hand welder from bad karma. He will respond. He only sells prints, the recast issues are of enough concern that he will not sell his files.

M577 app by Crane Body:
https://www.gambody.com/3d-models/m577-apc-avp

Drake555 sells:
tThe extra parts for the smartgunner headset to go with original Olympus T28 parts and Pentax lens. Post on PX WTB smart gunner headset from drake. (as pictured here:) viewtopic.php?f=3&t=18693

These threads are build progress documentation on 3d printed pieces:
viewtopic.php?f=3&t=19105&p=270714&hilit=3d+printed#p270714
Alien Isolation motion tracker




Pepakura stuff I am not sure if they would be appropriate to list here as well.

_________________
The impossible takes a while longer and goes over budget too...

Please post any file links I am missing.

_________________
The impossible takes a while longer and goes over budget too...

I also have refleca files created from measurements off real world parts and a fairly close super siren box.

While I applaud the sentiment here, this thread is on will suffer from the same issues as 3rd party image linking does; links will change/disappear.

Almost need a group Dropbox / Google Drive, but that then will end up having version currency problems ...

_________________
Cpl Aron "septic" Williams
A10/TQ0.0.82146E1

I came across these files recently. They're not free but the detail is fantastic and the customer support from this site is real good, which made it worth it to me. I started printing the APC FDM files and scaled them up to fit the NECA 6" figures. So far I've only got half of the hull printed (due to having too many projects at once) but I plan to get the whole thing done at some point. They also have the drop ship scaled to receive the APC. I'd love to print that to scale too at some point.

https://www.gambody.com/3d-models/m577-apc-avp

Actually just having a repository master that notes version differences as some versions work better for some folks in certain applications.

The Content Versioning System(CVS) was created mainly for linux codebase projects where multiple individuals were working on pieces of a large project (say video game, new Point of Sale System (POS), or modeling software)

However, due to licensing and royalty issues any such repository will have to be done on an individual basis on a non profit intention.

IP laws are pretty clear, but 3d printing and file ownership seriously muddies things. Even spat and gman talks about how badly 3d printing has confused the recasting/reselling market.

_________________
The impossible takes a while longer and goes over budget too...

It looks like the OP wasn't that long ago, but "smrtazzsmrtgnnr" does not exist on Thingiverse. I can't find them by searching for the items either. Anyone know if the username has changed, or if I can find these files elsewhere? TIA!

OK, it appears that those have not been shared with the internet.

https://cults3d.com/en/3d-model/various ... onchavigas

That is the closest you can find but you still have to get OEM parts. Very hard to find parts in some instances.

The issue is that the 3d files are not the best ones out there. If you are fine with that I can get you the files just do not share please.

_________________
The impossible takes a while longer and goes over budget too...

Yup, I've seen that one. I was looking for something that isn't an incomplete set of files for $30...
Thanks

That is simply because it is my exclusive AL forums name, used no where else. I have modeled as much as I could off as many real world parts as I could get my hands on. But, as I have to go to work now, the best I can do is leave a pic or two to tease the hell out of people.

That is simply because it is my exclusive AL forums name, used no where else. I have modeled as much as I could off as many real world parts as I could get my hands on. But, as I have to go to work now, the best I can do is leave a pic or two to tease the hell out of people. [/quote
Sadistic but I admire that!

I have separated out the parts and made and "exploded view" files for assembly suggestions. Here is a preview.

Any interested parties should feel free to email me.

smrtazzsmrtgnnr, that is precisely what I've been looking for. Messaged you.

I would add I used a neutral 90 degree connector on mine that I disassembled that fit right on with very little modification for the wiring harness part. I managed to fit an ntsc 1.5" screen in the eyecup. A pyle backup camera ft in the camera with very little modification.

_________________
The impossible takes a while longer and goes over budget too...

My 3d file for the Pentax housing can be found with the helmet camera, here; https://www.thingiverse.com/thing:4567881

And 1 final image, them I am done hijacking this thread and creating chaos.

My work is done here.



I had to rework the eye cup file, as I FINALLY noted that it did not match film models. Compare the images to see the rework.

Yeah, I did see your helmetcam a while back and was going to remodel that slightly for my own design if I went down that road.
Thanks for your help!

Found this linked off of thangs.com and searching for aliens

Locator tube:
https://www.thingiverse.com/thing:5002501

_________________
The impossible takes a while longer and goes over budget too...

I like that guys username

Also hand welder: https://www.thingiverse.com/thing:4946510

and basic earflap: https://www.thingiverse.com/thing:5028126

OK, 3d printed new magazine bottom for HCG rifle:
http://www.pulserifle.net/

_________________
The impossible takes a while longer and goes over budget too...