Hello Chappies.

So i'm making my next costume for casual drops maybe and of cause another manniquin display. And i'm looking for some pictures of the Parker jackets that were used in the movie so i can assemble a quick Fury 161 prisoner jacket. I would love it if anyone can give me a hand with the resources and would also like it if someone could help me with the picture designs.

Thanks

Callum

_________________
Sgt C. Kee-McParlin
A05/TQ1.0.02160E1

13th Regt. 1st Batt. 'Freebooters'

Not sure what you mean by picture designs but if you mean patches there were some available a while back. Mike Rush made the red & black 'W-Y 161' and 'Serenity through Confinement' patches. I don't doubt these have been copied and are probably out there if you look hard enough.

As for the Parka jackets ('Parker' was Brett's colleague on the Nostromo) I can't think of what they are off the top of my head although the name 'Alpha Industries' comes to mind. I'm sure someone will chime in about these. Have you checked the archives section?

Harry

_________________

http://www.facebook.com/TheHHACA - @TheHHACA

N-2b


They sell white ones in Germany..

_________________
A72/TQ6.6.95356E8





"I plan to live forever.........or die trying!"

Ooohhh...............WY A3 trooper costume then!

_________________
A72/TQ6.6.95356E8





"I plan to live forever.........or die trying!"

Are you going to shave your head? Apparently they have a problem with lice....

_________________
"You know, you blow up one sun and suddenly everyone expects you to walk on water."

Haha, Well done Harry. Got me back for the old man Harris piccy! *KINDA*

Yeah, i have the two badges and the print out design with the "W-Y" thing to go on the back. Which i shall get pressed on by my local T-shirt pressers.

Thanks Karyn for the link, i think i shall very much buy one of them and experiment.

Mole, i shall not be shaving my head but i shall use a shower cap and paint some stuble on it. =]

*cough, splutters joke joke*

Cheers Chappies!

Callum

_________________
Sgt C. Kee-McParlin
A05/TQ1.0.02160E1

13th Regt. 1st Batt. 'Freebooters'

If I recall correctly the large W-Y insignias on the backs of the garments looked more like they were applied either with aerosol car paint or fabric paint. None that I saw looked like they were T-shirt stencils.

Harry

_________________

http://www.facebook.com/TheHHACA - @TheHHACA

mmmmmm

Intresting, cheers Harry!

I managed to find that propstore sold the original Clemens on awhile back.

Sweet!

_________________
Sgt C. Kee-McParlin
A05/TQ1.0.02160E1

13th Regt. 1st Batt. 'Freebooters'

Hi Callum,
...the Parker jacket (WY Company: for Aaron, Clemens and Andrews...) have NO large W-Y insignia on the back...
The W-Y insignias are on the backs of the prisoners jackets ONLY !

Bye
Giò

But... But... How did I miss that! *sobs*

No no no no no no no, young man!
You've got far too many cool costumes as it is!
Make one for me instead!!

If I recall, been a while since I've seen the film, they had a black WY on the back of their shirts/jackets correct?
What I would do is cut a stencil, out of poster board (whatever), tape it to your shirt, pick up a boot brush and some
black shoe polish and rub that stuff right into your jacket.

We did this in the Marines, in recruit training, and the effect is perfect. It weathers pretty well, over time....
and is fairly permanent even if you throw it in the wash.

_________________
If you accept pocket lint as a currency well I'll take it all!

Okay so this has turned into a proper project now. I will post pictures once done. But i'm currently looking for replica pants and boots worn by Clemens, Andrews or Aaron.

Thanks Peeps

_________________
Sgt C. Kee-McParlin
A05/TQ1.0.02160E1

13th Regt. 1st Batt. 'Freebooters'

Watching this thread with interest

_________________
MSgt, UKCM 42nd Reg., 1st Batt. : Hadrian's Wall. UKCM

Wasteland Workshop
Props, cosplay pieces, upcycled ornamentation, and miscellanea;
For the discerning survivor of the apocalypse.
Steve Fletcher : Maker, Scavenger, and Junksmith.
linktr.ee/wastelandworkshop

who do i have to pay for one?

_________________
Beserker
Brian "Anubian" Webb
WYI/TQ1.0.04837E5
U.S.S. Nemesis
Weyland Yutani Inmate

If you are after a white N2B, these guys sell them, or at least used to. They're in germany and i'm pretty sure they ship internationally.

http://www.recon-company.com/N2B_Flight_Jacket_Vintage_White-11163-1805-d.html

Hello Callum,
here is a ref. pic regarding the A3 boots...
Bye
Giò
(do you need of pics regarding pants too?)

Look very similar to 20 hole Ranger boots.

_________________
Martin 'Victim' Victory
A86/TQ3.4.49421E3
UKCM 13th Regt. 1st Batt. Freebooters


you can't take the PUNK outa Spunkmeyer

I own screen used WY red patches if you need one to copy. They were silk screened.
George

_________________
www.TimeslipCreations.com

Thank you Gio for the boot reference.

And also to George for the assistance with the patch but i have the WY 161 patch and the other with the bird.
Forgets name!!!

Gio if you can get reference for the pants that would be highly greatful.

Thanks

Callum

_________________
Sgt C. Kee-McParlin
A05/TQ1.0.02160E1

13th Regt. 1st Batt. 'Freebooters'

Vito, is there any chance you could post a photo of the dove patch?

I'm just curious whether it's one of the ones I made (I was the first) or whether it's a recast. (Please note I mean this as no reflection on you whatsoever!)

_________________
Mike

"We're not heroes - we're from Finchley"

Mike, do you still offer them?

I thought the WY 161 is embroidered. That's what I got from the PSofL auction picts.

Got some picts george?

I did some line art referencing the auction picts, and haven't seen a good repro.

Ok, ...the details !

... the WY 161 red patches of all prisoners are silk screened ...
... while those ones for the Prison staff (Clemens, Andrews and Aaron) are embroidered!
Also ... the “Serenity” patch (only for the Prison staff) are embroidered ... but those ones for the STUNT version jackets ... are silk screened!

I hope this helps
Bye
Giò

Great to see this thread started up, being as I'm going to be putting together one of these jackets for myself probably next month. (I have plans of making my own molds for vacuum-forming USCM armor, but that's on the back burner.) I'm looking forward to seeing how you guys who are making some do yours.