Hi everyone,
If possible,could anyone here help me.
I have a Marsatacks IR sight in row form wich i have to bild up,i'll be making the frame and sliderails out of aluminium, but i need some detailed photos of the fully built version,especialy the microswitch,and it's missing the frame with theT bars,can or does anyone 3D print these or point me in the right Direktion.

Many many thanks in advance
Neil

_________________
Cpl N.Storey A12/TQ2.0.02132E1
MARINE RAIDER

Hi Neil do you need some photos of mine (which you had to repair!) - Pete

_________________
A02/TQ2.0.52141E1

"Errr... Roger that's a 2-1-6..."

Hi Pete.
Yes please,that would be realy helpfull mate,thanks.

_________________
Cpl N.Storey A12/TQ2.0.02132E1
MARINE RAIDER

Ok buddy will message you on FB

_________________
A02/TQ2.0.52141E1

"Errr... Roger that's a 2-1-6..."

I also have a Marsattacks IR sight, unbuilt and incomplete ( bought parts)... If you're willing to please post photos here that would be helpful.

I’ve not forgotten, Neil… got in from work mega late tonight

_________________
A02/TQ2.0.52141E1

"Errr... Roger that's a 2-1-6..."

No Problem at all Pete,whenever your ready mate.

_________________
Cpl N.Storey A12/TQ2.0.02132E1
MARINE RAIDER

IIRC, Marsattack's design was "inspired" by Skapunkjedi's.
I'll point him this way.

_________________
MSgt, UKCM 42nd Reg., 1st Batt. : Hadrian's Wall. UKCM

Wasteland Workshop
Props, cosplay pieces, upcycled ornamentation, and miscellanea;
For the discerning survivor of the apocalypse.
Steve Fletcher : Maker, Scavenger, and Junksmith.
linktr.ee/wastelandworkshop

Got the main frame and the Plexiglas parts,and i made an aluminium frame today,
So all i need realy is the frame with the
T bars.
Don't know if there are any 3D files for that.

_________________
Cpl N.Storey A12/TQ2.0.02132E1
MARINE RAIDER

shoot photos of the setup please...

_________________
The impossible takes a while longer and goes over budget too...