In the past month, I've picked up both an AGM MG42 and a 3D Printer.

Looking at a number of different files for the M56, but I wanted to ask if anyone here has found a set (pref. free) that they are happy with.

Looking for headset files as well!

_________________
Sci-Firepower Prop Collection:
https://www.facebook.com/scifirepower/

smartazzgunner has made files I think.

He also made 3d files for the should lamp. The fins on the lamp I had to go with a resin cast ones from spat due to heat and spacing issues.

I just took a 1/8" steel plate and trimmed it down a little for the back piece and used a spats mounting kit for the shoulder lamp.


I still have not gotten to solving issues with the weight on the headset, but, I have fully functional electronics stuffed in it.

_________________
The impossible takes a while longer and goes over budget too...

I am only using portions of it, but this free model has suited my needs quite well:

https://www.thingiverse.com/thing:31604 ... Bvg2lV8ZjM

_________________
My entry-level prop and costume tutorials: viewtopic.php?f=3&t=12751

What are you using for an eyepiece? I was looking at the Vufine, but I've heard a lot of bad things about them.

_________________
Sci-Firepower Prop Collection:
https://www.facebook.com/scifirepower/

What kind of printer do you have Erik, Resin or PLA?
Here is the headset I printed on an elegoo mars pro resin printer.
It is not free and you will need some additional parts, but it is a very nice model:
https://cults3d.com/en/3d-model/various ... onchavigas
my review and build pics are at the bottom of the page.
This designer also made smartgun parts for an airsoft mg42 (so they should fit your AGM)

This is a compilation thread on all the 3d files out there:
viewtopic.php?f=3&t=17274&hilit=3d+files

_________________
The impossible takes a while longer and goes over budget too...

Epsilon that is a very helpful guide!

_________________
My entry-level prop and costume tutorials: viewtopic.php?f=3&t=12751

Don’t know if this Should be in PX or here but just letting you know a friend of mine just finished a VP70 file. His a 3D modeller for ford so it’s been very well designed.
[url][/url]
https://www.etsy.com/au/listing/1140151 ... ch_click=1

Generally it is intent. If it is a signifigant contribution to the discussion it is OK to post outside of PX.

_________________
The impossible takes a while longer and goes over budget too...