| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| 3d printed files http://forum.alienslegacy.com/viewtopic.php?f=3&t=19391 |
Page 1 of 1 |
| Author: | knoxvilles_joker [ Sun Mar 14, 2021 3:22 am ] |
| Post subject: | 3d printed files |
The current STL file format does not have any copyright restrictions or other DRM built-in to the file format and protocol. The stealing of forsale files or printing and resale without first contacting the file owner is akin to recasting. Recasting is a bannable offense on most all prop and replica fan forums. A best effort will be made to keep this list as accurate as possible, and notes added on any dimension change recomendations to increase film accuracy. If using a file it is considered polite to inform the creator you are using it. This helps make it easier to run down IP theft cases. Etsy and thingiverse are rife with rip off copies of paid for files that are taken down as fast as they are put up there. If you find a file please respond to this thread and we will append the first post so we have as complete a listing as possible. These are free: https://www.thingiverse.com/thing:4056653 Artist: MoeSizzlac Matt Kauffman(smrtazzsmrtgnnr) has made a series of Aliens prop replica files including: smartgunner headset marine helmet camera super siren housing for the shoulder lamp. reflecta lamp housing for shoulder lamp https://www.thingiverse.com/thing:1733311 Motion tracker by DrMoribus https://www.thingiverse.com/thing:3696123 alien isolation motion tracker by introdg Items by MartinR1000 https://www.thingiverse.com/thing:3593249 Smartgun https://www.thingiverse.com/thing:4417006 USCM belt tool https://www.thingiverse.com/thing:4310248 Aliens Smartgun battery pack https://www.thingiverse.com/thing:3592028 Nostromo flamer unit by hotpretzel https://www.thingiverse.com/thing:3779410 uss sulaco by Canison These you pay for: Laelle on therpf.com sells a wolf predator 3d printed set. https://www.cgtrader.com/3d-print-model ... or-cosplay alien isolation motion tracker by treekiller https://www.etsy.com/listing/930464851/ ... on-replica Alien resurrection gun by member buissonland https://www.cgtrader.com/3d-print-model ... le-replica Alien space suit helmet by JulianDanzer. This is a large print and is only cost effective if you do at home yourself. https://www.etsy.com/listing/778538135/ ... ch_click=1 alien isolation revolver by dreamofprops BadKarma sells a print of the hand welder. Just post on the PX that you WTB:Hand welder from bad karma. He will respond. He only sells prints, the recast issues are of enough concern that he will not sell his files. M577 app by Crane Body: https://www.gambody.com/3d-models/m577-apc-avp Drake555 sells: tThe extra parts for the smartgunner headset to go with original Olympus T28 parts and Pentax lens. Post on PX WTB smart gunner headset from drake. (as pictured here:) viewtopic.php?f=3&t=18693 These threads are build progress documentation on 3d printed pieces: viewtopic.php?f=3&t=19105&p=270714&hilit=3d+printed#p270714 Alien Isolation motion tracker Pepakura stuff I am not sure if they would be appropriate to list here as well. |
|
| Author: | knoxvilles_joker [ Sun Mar 14, 2021 8:29 pm ] |
| Post subject: | |
Please post any file links I am missing. |
|
| Author: | smrtazzsmrtgnnr [ Mon Mar 15, 2021 5:31 am ] |
| Post subject: | |
I also have refleca files created from measurements off real world parts and a fairly close super siren box. |
|
| Author: | septic [ Tue Mar 16, 2021 9:31 pm ] |
| Post subject: | |
While I applaud the sentiment here, this thread is on will suffer from the same issues as 3rd party image linking does; links will change/disappear. Almost need a group Dropbox / Google Drive, but that then will end up having version currency problems ... |
|
| Author: | TomCM22 [ Tue Mar 16, 2021 11:11 pm ] |
| Post subject: | Re: 3d printed files |
I came across these files recently. They're not free but the detail is fantastic and the customer support from this site is real good, which made it worth it to me. I started printing the APC FDM files and scaled them up to fit the NECA 6" figures. So far I've only got half of the hull printed (due to having too many projects at once) but I plan to get the whole thing done at some point. They also have the drop ship scaled to receive the APC. I'd love to print that to scale too at some point. https://www.gambody.com/3d-models/m577-apc-avp |
|
| Author: | knoxvilles_joker [ Wed Mar 17, 2021 4:15 pm ] |
| Post subject: | Re: |
septic wrote: While I applaud the sentiment here, this thread is on will suffer from the same issues as 3rd party image linking does; links will change/disappear. Almost need a group Dropbox / Google Drive, but that then will end up having version currency problems ... Actually just having a repository master that notes version differences as some versions work better for some folks in certain applications. The Content Versioning System(CVS) was created mainly for linux codebase projects where multiple individuals were working on pieces of a large project (say video game, new Point of Sale System (POS), or modeling software) However, due to licensing and royalty issues any such repository will have to be done on an individual basis on a non profit intention. IP laws are pretty clear, but 3d printing and file ownership seriously muddies things. Even spat and gman talks about how badly 3d printing has confused the recasting/reselling market. |
|
| Author: | Apoc03 [ Tue Nov 30, 2021 4:01 pm ] |
| Post subject: | Re: 3d printed files |
It looks like the OP wasn't that long ago, but "smrtazzsmrtgnnr" does not exist on Thingiverse. I can't find them by searching for the items either. Anyone know if the username has changed, or if I can find these files elsewhere? TIA! |
|
| Author: | knoxvilles_joker [ Tue Nov 30, 2021 8:14 pm ] |
| Post subject: | Re: 3d printed files |
Apoc03 wrote: It looks like the OP wasn't that long ago, but "smrtazzsmrtgnnr" does not exist on Thingiverse. I can't find them by searching for the items either. Anyone know if the username has changed, or if I can find these files elsewhere? TIA! OK, it appears that those have not been shared with the internet. https://cults3d.com/en/3d-model/various ... onchavigas That is the closest you can find but you still have to get OEM parts. Very hard to find parts in some instances. The issue is that the 3d files are not the best ones out there. If you are fine with that I can get you the files just do not share please. |
|
| Author: | Apoc03 [ Tue Nov 30, 2021 9:14 pm ] |
| Post subject: | Re: 3d printed files |
Yup, I've seen that one. I was looking for something that isn't an incomplete set of files for $30... Thanks |
|
| Author: | smrtazzsmrtgnnr [ Wed Dec 01, 2021 3:39 am ] | |||
| Post subject: | Re: 3d printed files | |||
Apoc03 wrote: ... but "smrtazzsmrtgnnr" does not exist on Thingiverse.... That is simply because it is my exclusive AL forums name, used no where else. I have modeled as much as I could off as many real world parts as I could get my hands on. But, as I have to go to work now, the best I can do is leave a pic or two to tease the hell out of people. 
|
||||
| Author: | Zerocool1028 [ Wed Dec 01, 2021 4:36 am ] |
| Post subject: | Re: 3d printed files |
smrtazzsmrtgnnr wrote: Apoc03 wrote: ... but "smrtazzsmrtgnnr" does not exist on Thingiverse.... That is simply because it is my exclusive AL forums name, used no where else. I have modeled as much as I could off as many real world parts as I could get my hands on. But, as I have to go to work now, the best I can do is leave a pic or two to tease the hell out of people. [/quoteSadistic but I admire that! |
|
| Author: | smrtazzsmrtgnnr [ Wed Dec 01, 2021 4:00 pm ] | ||
| Post subject: | |||
I have separated out the parts and made and "exploded view" files for assembly suggestions. Here is a preview. Any interested parties should feel free to email me.
|
|||
| Author: | Apoc03 [ Wed Dec 01, 2021 4:56 pm ] |
| Post subject: | Re: 3d printed files |
smrtazzsmrtgnnr, that is precisely what I've been looking for. Messaged you. |
|
| Author: | knoxvilles_joker [ Wed Dec 01, 2021 5:11 pm ] |
| Post subject: | Re: 3d printed files |
Apoc03 wrote: smrtazzsmrtgnnr, that is precisely what I've been looking for. Messaged you. I would add I used a neutral 90 degree connector on mine that I disassembled that fit right on with very little modification for the wiring harness part. I managed to fit an ntsc 1.5" screen in the eyecup. A pyle backup camera ft in the camera with very little modification. |
|
| Author: | smrtazzsmrtgnnr [ Thu Dec 02, 2021 12:04 am ] | |||
| Post subject: | ||||
My 3d file for the Pentax housing can be found with the helmet camera, here; https://www.thingiverse.com/thing:4567881 And 1 final image, them I am done hijacking this thread and creating chaos. My work is done here. I had to rework the eye cup file, as I FINALLY noted that it did not match film models. Compare the images to see the rework.
|
||||
| Author: | Apoc03 [ Thu Dec 02, 2021 2:21 pm ] |
| Post subject: | |
Yeah, I did see your helmetcam a while back and was going to remodel that slightly for my own design if I went down that road. Thanks for your help! |
|
| Author: | knoxvilles_joker [ Wed Dec 08, 2021 3:58 pm ] |
| Post subject: | |
Found this linked off of thangs.com and searching for aliens Locator tube: https://www.thingiverse.com/thing:5002501 |
|
| Author: | djdrthq [ Fri Dec 10, 2021 10:34 pm ] |
| Post subject: | Re: 3d printed files |
knoxvilles_joker wrote: Found this linked off of thangs.com and searching for aliens I like that guys username  Also hand welder: https://www.thingiverse.com/thing:4946510 and basic earflap: https://www.thingiverse.com/thing:5028126 |
|
| Author: | knoxvilles_joker [ Sat Sep 17, 2022 11:19 pm ] |
| Post subject: | |
OK, 3d printed new magazine bottom for HCG rifle: http://www.pulserifle.net/ |
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|