The Aliens Legacy http://forum.alienslegacy.com/ |
|
Single servo and light plasma Cannon http://forum.alienslegacy.com/viewtopic.php?f=3&t=17433 |
Page 1 of 1 |
Author: | knoxvilles_joker [ Fri Apr 13, 2018 3:44 pm ] |
Post subject: | Re: Single servo and light plasma Cannon |
I ran out of steam last night to get the light added. This is more of a space/motion mockup test fitting for Marble City Comic Con next weekend. By the end of the weekend I should know for sure whether or not this unit is stout enough for the next addition: a second servo for tilt functionality. I am using a push button servo control board from sparkfun on this. Great in that it does not have to be programmed to work. You just set the potentiometers(POTS) add a push button switch and you are good to go. I am adding this separately as this is a good showcase on what you can do if you have no knack for coding. |
Author: | knoxvilles_joker [ Mon Apr 16, 2018 9:46 pm ] | |||
Post subject: | Re: Single servo and light plasma Cannon | |||
OK basic build is done. And I would stress on the basic part. I will have to pull a late night just to get things done...
|
Author: | knoxvilles_joker [ Mon Apr 23, 2018 2:55 pm ] |
Post subject: | |
OK the temporary setup worked OK. The hitech hg645 servos withstood abuse, the occasional knock. Wood was a great medium for housing the servos and brackets. |
Author: | knoxvilles_joker [ Wed Apr 25, 2018 4:54 pm ] |
Post subject: | Re: Single servo and light plasma Cannon |
https://www.facebook.com/knoxvillesjoke ... 101469322/ Video of it in action. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |