The Aliens Legacy http://forum.alienslegacy.com/ |
|
Marine Raider V3 http://forum.alienslegacy.com/viewtopic.php?f=3&t=17393 |
Page 1 of 2 |
Author: | SulacoBoy [ Sat Mar 17, 2018 11:25 am ] |
Post subject: | Marine Raider V3 |
Hey comrades, it’s been about a year since I sold my beloved suit due to a family crisis. Last year my brother was paralyzed from a work accident. So me living in CA and him in MI I had to sell pretty much everything including my suit with found parts. So I could move back home and take care of him. He survived the injury and is alive. But took a intense 6 months of rehab (severed spine/ traumatic brain injury) Anyways I am working on a V2 Raider Build. I’ll start posting progress here. If anyone has spare parts for sale lmk. -Pac |
Author: | the_rookie [ Sat Mar 17, 2018 9:42 pm ] |
Post subject: | |
i will be following this as i am doing a marine raider build as well. |
Author: | SulacoBoy [ Sun Mar 18, 2018 10:35 pm ] |
Post subject: | |
Stealth Raider Patch. |
Author: | Moosh89 [ Fri Apr 13, 2018 3:48 am ] |
Post subject: | |
I like the subtle unique look! |
Author: | SulacoBoy [ Fri Apr 13, 2018 5:25 am ] |
Post subject: | Re: |
Moosh89 wrote: I like the subtle unique look! Mhm I agree! |
Author: | SulacoBoy [ Sun Apr 15, 2018 10:04 pm ] |
Post subject: | |
Finished up my Incinerator for my build. |
Author: | smrtazzsmrtgnnr [ Sun Apr 15, 2018 10:52 pm ] |
Post subject: | Re: |
Bacta Baby wrote: Finished up my Incinerator for my build. Is that 3D printed? |
Author: | SulacoBoy [ Sun Apr 15, 2018 11:06 pm ] |
Post subject: | Re: Re: |
smrtazzsmrtgnnr wrote: Bacta Baby wrote: Finished up my Incinerator for my build. Is that 3D printed? Yes, it’s the one from Etsy. But I upgraded parts using a chopped up airsoft M-16. |
Author: | SulacoBoy [ Mon Apr 16, 2018 2:11 am ] |
Post subject: | |
Grenade straps from Noble. |
Author: | Epsilon [ Tue Apr 17, 2018 9:53 am ] |
Post subject: | |
very nice thanks for sharing, are there any movable parts on the incinerator with your upgrade? Iḿ considering ordering the same printed version. Keep on building |
Author: | SulacoBoy [ Tue Apr 17, 2018 6:39 pm ] |
Post subject: | Re: |
Epsilon wrote: very nice thanks for sharing, are there any movable parts on the incinerator with your upgrade? Iḿ considering ordering the same printed version. Keep on building Nah, it’s static. Thanks! |
Author: | Corp Hicks [ Tue Apr 17, 2018 9:05 pm ] |
Post subject: | |
You need to turn ur sheath around, like Hicks in the movie, it's way easier to get the knife out if u turn it around.... |
Author: | SulacoBoy [ Tue Apr 17, 2018 10:46 pm ] |
Post subject: | Re: |
Corp Hicks wrote: You need to turn ur sheath around, like Hicks in the movie, it's way easier to get the knife out if u turn it around.... Heh, that’s true! The back looks ugly so I’ll pass lol. |
Author: | septic [ Tue Apr 17, 2018 11:26 pm ] |
Post subject: | |
That spike on the front of the flamer nozzle reminds me those 1911 recoil spring plug spikes you can get for pimpin out your pistol Attachment: Wicked Grips 1911 Plug Spike.jpg [ 30.89 KiB | Viewed 9158 times ] [Pic from https://wickedgrips.com/product/1911-brass-recoil-spring-plug-spike/] Also digging those badges, not seen those before; from Etsy? |
Author: | Corp Hicks [ Tue Apr 17, 2018 11:44 pm ] |
Post subject: | Re: Re: |
Bacta Baby wrote: Corp Hicks wrote: You need to turn ur sheath around, like Hicks in the movie, it's way easier to get the knife out if u turn it around.... Heh, that’s true! The back looks ugly so I’ll pass lol. Yes, u are right, looks ugly, I just cover it with more ducktape.... ) |
Author: | agg cook [ Fri May 11, 2018 7:54 pm ] |
Post subject: | |
looks like the same incinerator I got it was in hollow sections I put a threaded bar right from end to end and bolted the lot together I also removed the resin sling loops and made some metal ones that I attached to the threaded bar to make sure they could hold a sling and not break trooping I also drilled afew holes in each section and pumped resin inside to also make it stronger and add a little weight lol |
Author: | SulacoBoy [ Sat May 12, 2018 11:44 am ] |
Post subject: | Re: |
agg cook wrote: looks like the same incinerator I got it was in hollow sections I put a threaded bar right from end to end and bolted the lot together I also removed the resin sling loops and made some metal ones that I attached to the threaded bar to make sure they could hold a sling and not break trooping I also drilled afew holes in each section and pumped resin inside to also make it stronger and add a little weight lol Very nice! |
Author: | SulacoBoy [ Sun Jun 24, 2018 4:27 am ] | |||||
Post subject: | ||||||
Update on my Raider V2 aluminum build. Still needs some paint touch ups on the rivets. Straps need to be fixed permanently and finish up some resin bits. Waiting on my Spat BDUS. How’s it looking? I have a whole bunch of photos of this build step by step. But my computer broke and can’t upload them..
|
Author: | SulacoBoy [ Sun Jun 24, 2018 4:29 am ] |
Post subject: | |
Also screen accurate wasn’t my main focus. Just a decent USCM build with my own twist. (RAIDER) |
Author: | Moosh89 [ Sun Jun 24, 2018 5:08 am ] |
Post subject: | |
Looking bad ass! love the paint! |
Author: | SulacoBoy [ Sun Jun 24, 2018 5:18 am ] |
Post subject: | Re: |
Moosh89 wrote: Looking bad ass! love the paint! Thanks Moosh! |
Author: | seven [ Mon Jun 25, 2018 10:51 pm ] |
Post subject: | |
that is sick, love the color choices, who made the shin guards and upper? |
Author: | Aoshi1 [ Wed Jun 27, 2018 4:40 pm ] |
Post subject: | |
The kit looks amazing, very well done. Did you make the greaves? Or are they from a particular maker? Asking because I am digging them ^___^ |
Author: | Yellowjacket [ Mon Jul 02, 2018 6:19 am ] |
Post subject: | Re: Marine Raider V2 |
Long live the Colonial Raiders! It looks great. |
Page 1 of 2 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |