The Aliens Legacy http://forum.alienslegacy.com/ |
|
Motion Tracker help needed.... http://forum.alienslegacy.com/viewtopic.php?f=3&t=17269 |
Page 1 of 1 |
Author: | retrogarde [ Sun Jan 21, 2018 2:12 pm ] |
Post subject: | |
Noble made a 3D model through Shapeways. Here you go: https://www.shapeways.com/product/6UKVEVTGL/mt-widget-base?optionId=60766731 |
Author: | Corp Hicks [ Sun Jan 21, 2018 4:01 pm ] |
Post subject: | |
Wow, thanks a lot..., already ordered....! U make my day.... |
Author: | retrogarde [ Sun Jan 21, 2018 4:20 pm ] |
Post subject: | |
My pleasure! Glad to help with a Motion Tracker build, but real thanks to Noble for making the file. |
Author: | knoxvilles_joker [ Sun Jan 21, 2018 6:49 pm ] |
Post subject: | Re: |
retrogarde wrote: Noble made a 3D model through Shapeways. Here you go: https://www.shapeways.com/product/6UKVEVTGL/mt-widget-base?optionId=60766731 Do we have a list anywhere of the various 3-d models folks have made for their props? |
Author: | retrogarde [ Sun Jan 21, 2018 9:25 pm ] |
Post subject: | |
As far as I know we don't... ...but we absolutely should! |
Author: | knoxvilles_joker [ Mon Jan 22, 2018 1:26 am ] |
Post subject: | Re: |
retrogarde wrote: As far as I know we don't... ...but we absolutely should! Can we get a stacked thread that lists all such useful things? Or is that a bad idea? All the search engines are so fickle that it can literally take weeks of on and off searches to find parts for a given build. |
Author: | Peterlb [ Thu Jun 28, 2018 12:18 am ] |
Post subject: | Re: Motion Tracker help needed.... |
Corp Hicks, Did the 3-D printed bracket work for the "pump widget"? I just ordered mine from Shapeways too. Wondered how it attaches to the Motion Tracker and the "pump widget" to it? I figured to epoxy it to the drill housing. And the "pump widget" bolts onto the bracket. |
Author: | Noble [ Thu Jun 28, 2018 2:52 am ] |
Post subject: | Re: Motion Tracker help needed.... |
There is one screw that you use to mount the bracket to the widget, but epoxy is better. Bracket then bolts to the drill body. |
Author: | Peterlb [ Thu Jun 28, 2018 6:34 am ] |
Post subject: | Re: Motion Tracker help needed.... |
Wow. Thanks Mr. Noble. So, I had it backwards. Bolt bracket to the drill, then epoxy the pump widget onto the bracket. Cool. Thanks very much. |
Author: | Willie Goldman [ Thu Jun 28, 2018 7:49 am ] |
Post subject: | |
Is there a 3D model of the actual tracker itself out there? |
Author: | Big Stew [ Thu Jun 28, 2018 11:16 am ] |
Post subject: | |
There is a file on thingiverse |
Author: | Noble [ Thu Jun 28, 2018 6:23 pm ] |
Post subject: | Re: Motion Tracker help needed.... |
Quote: So, I had it backwards. Bolt bracket to the drill, then epoxy the pump widget onto the bracket. More like epoxy bracket to pump widget to bracket, then bolt to kango body. |
Author: | Peterlb [ Sat Jun 30, 2018 10:40 am ] |
Post subject: | Re: Motion Tracker help needed.... |
Gotcha. I had the methods backwards and the steps outta place !!! I just got my bracket from Shapeways today !! I will try it out. Thanks for your help. |
Author: | Peterlb [ Wed Jul 04, 2018 6:13 am ] |
Post subject: | Re: Motion Tracker help needed.... |
Noble, I'm ready to put it altogether. Do you have a recommendation for epoxy? I usually use the Devcon epoxies - but wondered which worked best for dissimilar materials? Like the plastic from the Shapeways bracket and the aluminum from the Accucare pump widget. Thanks... |
Author: | Noble [ Thu Jul 05, 2018 1:18 am ] |
Post subject: | Re: Motion Tracker help needed.... |
5min devcon is good. Minor sanding/scuffing smooth surfaces to be glued helps. |
Author: | Peterlb [ Thu Jul 05, 2018 2:46 am ] |
Post subject: | Re: Motion Tracker help needed.... |
Thanks Noble. That's the one that I use. Appreciate the help. |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |