The Aliens Legacy
http://forum.alienslegacy.com/

Hadley's Hope colony toolbox (Retrogarde Edition)
http://forum.alienslegacy.com/viewtopic.php?f=3&t=16249		 Page 1 of 2
Author:  retrogarde [ Sat Jun 25, 2016 7:52 pm ]
Post subject:  Hadley's Hope colony toolbox (Retrogarde Edition)
So right off the bat I have to give props to Dropshipbob for doing this exact project way before me:

viewtopic.php?f=3&t=16028

I wanted one of these puppies from the first time Willie pointed it out a few years back, but I didn't know how to go about finding one. Well, Moosh mentioned she had a spare so I made her an offer and now it's mine! I got some stencils made at the same time as Moosh is awesome at these.

Attachment:
13529085_10206632060895742_561067428538170254_n.jpg
13529085_10206632060895742_561067428538170254_n.jpg [ 77.68 KiB | Viewed 11366 times ]


I gave it a coat of grey and then weathered it with charcoal and matte spray. The irony is that the thing was already pretty weathered, but once I painted it grey it looked too pristine for a tool box. I added one of Willie's awesome WY stickers, but I'm not sure it is the right size for this prop. When I look at screengrabs of the one in Operations the carry handle is less wide than the tops of the light grey Y on the sticker. On mine the handle is even with the far edges of the yellow W. But that's a monor quibble.


Attachment:
13495353_10206644714012062_4343528943529165802_o.jpg
13495353_10206644714012062_4343528943529165802_o.jpg [ 354.18 KiB | Viewed 11366 times ]


I've only just begun decorating the inside, but finding "space tools" is fun! I've got a few more bits to add and I want to find a good blueprint for either the colony or the processor.

Attachment:
13502831_10206644718732180_3638742895654787578_o.jpg
13502831_10206644718732180_3638742895654787578_o.jpg [ 323.3 KiB | Viewed 11366 times ]


What else should I add?
Author:  88reaper88 [ Sat Jun 25, 2016 9:29 pm ]
Post subject: 
Maybe a civvie version of the welder? Catapiller yellow perhaps?
Author:  AceRimmer [ Sat Jun 25, 2016 9:58 pm ]
Post subject:  Re: Hadley's Hope colony toolbox (Retrogarde Edition)
If you can build sth like the hacking device from Alien: Isolation that would also be cool:

https://ilikeinterfaces.files.wordpress ... -55-49.png

Other stuff I could think of being in there:
-WY coffe mug
-big ol wrench, maybe also the one from Alien Isolation
-some screw driver with bits
Author:  retrogarde [ Sat Jun 25, 2016 10:35 pm ]
Post subject: 
Great ideas! Caterpillar yellow for sure.
Author:  88reaper88 [ Sun Jun 26, 2016 1:16 am ]
Post subject: 
I knew I spelt that wrong! ;)
Author:  bigbisont [ Sun Jun 26, 2016 3:37 am ]
Post subject:  Re: Hadley's Hope colony toolbox (Retrogarde Edition)
Cool project. I feel like some sort of electronic diagnostic device is needed. Maybe nothing as elaborate as a 'hack kit' but something with a screen and some interface cables for sure.
Author:  88reaper88 [ Sun Jun 26, 2016 11:40 am ]
Post subject: 
WD-40
Author:  gunny63 [ Sun Jun 26, 2016 4:37 pm ]
Post subject:  Re: Hadley's Hope colony toolbox (Retrogarde Edition)
every tool box should have a big hammer in it!
Author:  retrogarde [ Sun Jun 26, 2016 5:44 pm ]
Post subject:  Re:
88reaper88 wrote:
WD-40


Or WY-40. 8)
Author:  retrogarde [ Sun Jun 26, 2016 6:25 pm ]
Post subject: 
Attachment:
wy-40logo.jpg
wy-40logo.jpg [ 189.51 KiB | Viewed 11272 times ]


Now I just need to print it out and find a suitable container to put this on!
Author:  retrogarde [ Sat Jul 23, 2016 8:45 pm ]
Post subject:  Re:
88reaper88 wrote:
Maybe a civvie version of the welder? Catapiller yellow perhaps?


Your wish is my command.

Attachment:
13680082_10206818559798098_7018769507059264966_o.jpg
13680082_10206818559798098_7018769507059264966_o.jpg [ 301.57 KiB | Viewed 11152 times ]


(built out of stuff from my junk drawer including a compressed air "gun", part of a laser and some model helicopter pieces)

Attachment:
13717347_10206818560918126_3529297749991251322_o.jpg
13717347_10206818560918126_3529297749991251322_o.jpg [ 296.95 KiB | Viewed 11152 times ]


(a coat of caterpillar yellow)

Attachment:
13738271_10206818561638144_5022125289135643426_o.jpg
13738271_10206818561638144_5022125289135643426_o.jpg [ 300.91 KiB | Viewed 11152 times ]


Here it is dirtied up. I still need a piece of tinted plastic for the screen and maybe a few other small details. Maybe a CAT logo sticker... What do folks think?
Author:  577_ops [ Sat Jul 23, 2016 11:17 pm ]
Post subject:  Re: Hadley's Hope colony toolbox (Retrogarde Edition)
Great tool box idea. The civvie version welder looks great.
If you do a CAT logo I would say only a ver small one already damaged matching the overal weathering.

Now only a civvie headset and a civvie belt tool. ;)
Author:  retrogarde [ Sun Jul 24, 2016 1:50 am ]
Post subject: 
Lydecker has the kind of headset worn by the SmartGunners on his desk!
Author:  bigbisont [ Sun Jul 24, 2016 2:47 am ]
Post subject: 
Pretty cool man. Damn practical and fitting
Author:  Moosh89 [ Sun Jul 24, 2016 8:51 pm ]
Post subject: 
Your creations always amaze me Retro!
Author:  schotti [ Sun Jul 24, 2016 8:59 pm ]
Post subject:  Re: Hadley's Hope colony toolbox (Retrogarde Edition)
Thats fantastick mate well done :D
Author:  88reaper88 [ Mon Jul 25, 2016 1:14 am ]
Post subject: 
Spot on mate!
Author:  Dropshipbob [ Mon Aug 01, 2016 3:46 pm ]
Post subject: 
Love that welder!
Author:  ADC [ Mon Aug 01, 2016 10:42 pm ]
Post subject: 
Cool stuff Christian.
Author:  retrogarde [ Tue Aug 02, 2016 12:26 pm ]
Post subject: 
Thanks folks!
I've just found a good substitute for the glass screen, and I may give the thing a two tone repaint. We'll see!
Author:  retrogarde [ Fri Aug 19, 2016 12:48 am ]
Post subject: 
Latest additions to the toolbox!

The flare box is a little project Graham and I are working on. It isn't the exact box used in Alien3, but it's close enough for this.

Attachment:
14067822_10206984963758093_1233337542169177274_o.jpg
14067822_10206984963758093_1233337542169177274_o.jpg [ 306.25 KiB | Viewed 10858 times ]


I repainted the welder and added the "glass" (actually a piece of an old cassette tape cover and a disposable pair of sunglasses I found on the beach).

Attachment:
14068249_10206984965718142_1137748843047633440_n.jpg
14068249_10206984965718142_1137748843047633440_n.jpg [ 71.13 KiB | Viewed 10858 times ]


I'm still planning to go two tone with the paint job though.
Author:  septic [ Fri Aug 19, 2016 2:58 am ]
Post subject: 
AceRimmer wrote:
If you can build sth like the hacking device from Alien: Isolation that would also be cool:

https://ilikeinterfaces.files.wordpress ... -55-49.png

Very interesting, I've not played A:I but that 'hacking device' is clearly modelled after PRC90 [or similar] radio -

Image
Author:  retrogarde [ Tue Sep 13, 2016 2:16 am ]
Post subject: 
Boom! Shiny stickers have arrived to complete the Flare Box prop:

Attachment:
14311365_10207162957607828_3500392779703053731_o.jpg
14311365_10207162957607828_3500392779703053731_o.jpg [ 249.22 KiB | Viewed 10654 times ]


This reminds me though of Apone's line about the colonist's using seismic survey charges (or somesuch). It would be fun to extrapolate from this prop and make a box of those too!
Author:  Dropshipbob [ Tue Sep 13, 2016 3:14 pm ]
Post subject: 
Awesome!
Author:  Moosh89 [ Tue Feb 06, 2018 7:56 pm ]
Post subject:  Re: Hadley's Hope colony toolbox (Retrogarde Edition)
Another possible addition to compliment your welder :delta:

Attachment:
Stephens-Itex Handshield 802-Fibreglass-108x83mm-Lens Aliens.jpg
Stephens-Itex Handshield 802-Fibreglass-108x83mm-Lens Aliens.jpg [ 327.79 KiB | Viewed 7882 times ]
Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/