Been working with our own Matt Noble on figuring out a way to bring these to market. MUCH cheaper to make a master and have someone run castings:
| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| NECA & Hot Toys scaled wall panels http://forum.alienslegacy.com/viewtopic.php?f=3&t=16226 |
Page 1 of 3 |
| Author: | Willie Goldman [ Wed Jun 15, 2016 10:36 pm ] |
| Post subject: | NECA & Hot Toys scaled wall panels |
Been working with our own Matt Noble on figuring out a way to bring these to market. MUCH cheaper to make a master and have someone run castings:
|
|
| Author: | septic [ Wed Jun 15, 2016 11:05 pm ] |
| Post subject: | |
COOL! And floor tiles too??? Casting would be nice (online 3D printing services would run at about US$100 each 1:6 scale tile, which is ouchy of course). |
|
| Author: | 88reaper88 [ Wed Jun 15, 2016 11:47 pm ] |
| Post subject: | |
Sounds like a job for Nick 
|
|
| Author: | retrogarde [ Thu Jun 16, 2016 2:00 am ] |
| Post subject: | |
A) This is amazingly awesome and cool. I want some! B) I've never noticed the lit writing/numbers between the panels in Hadley's Hope! That's so cool! Wait, or is reflective tape catching the flash? The pipes are glowing too... |
|
| Author: | nick-a-tron [ Thu Jun 16, 2016 9:43 am ] |
| Post subject: | |
Look great! I'd be up for casting these if you require my services. |
|
| Author: | Willie Goldman [ Thu Jun 16, 2016 5:18 pm ] |
| Post subject: | |
Nick, could be fun if you want to chat further. We also have these:  
|
|
| Author: | bigbisont [ Thu Jun 16, 2016 5:22 pm ] |
| Post subject: | |
Now we are cookin'! |
|
| Author: | 577_ops [ Thu Jun 16, 2016 5:29 pm ] |
| Post subject: | Re: NECA & Hot Toys scaled wall panels |
The Neca setup is great! Okay diorama time. This means time to throw some money!  I would definitely be in for a few sets to build a corridor. |
|
| Author: | Willie Goldman [ Thu Jun 16, 2016 5:37 pm ] |
| Post subject: | |
Throw a Sentry Gun in there and all you need left is a deck of cards. |
|
| Author: | 577_ops [ Thu Jun 16, 2016 5:41 pm ] |
| Post subject: | Re: |
Willie Goldman wrote: Throw a Sentry Gun in there and all you need left is a deck of cards. Affirmative! 
|
|
| Author: | AceRimmer [ Thu Jun 16, 2016 7:52 pm ] |
| Post subject: | |
Any chance to get these at 1:32 and with even finer printing? I could well use a set. |
|
| Author: | Willie Goldman [ Thu Jun 16, 2016 8:38 pm ] |
| Post subject: | |
It may be possible - first step is to lock down and mold and caster, if we can get that infrastructure set up, we should be able to print additional scales. The colony pillar dimensions were taken directly off production reference. |
|
| Author: | Dropshipbob [ Thu Jun 16, 2016 10:34 pm ] |
| Post subject: | |
*faints* |
|
| Author: | AceRimmer [ Thu Jun 16, 2016 10:54 pm ] |
| Post subject: | |
Blap! Models in Canada is a highly professional casting service and I have already worked with them. They have cast several of my models in the past and the castings are crisp and clean and the resin is of the non-stinky quality. I can definately recommend them. Edit: Forgot to link: http://www.blapmodels.com/ |
|
| Author: | retrogarde [ Fri Jun 17, 2016 12:12 pm ] |
| Post subject: | |
Damn! This is getting crazy! |
|
| Author: | MattRendar [ Sat Jun 18, 2016 3:48 am ] |
| Post subject: | |
Holy smoke !! I will buy these in a heart beat ! Very interested !!! |
|
| Author: | Willie Goldman [ Sat Jun 18, 2016 5:46 am ] |
| Post subject: | |
Nick, hey, maybe we should try and figure something out - I can find a way to ship these to you if you're interested... |
|
| Author: | nick-a-tron [ Sun Jun 19, 2016 8:57 am ] |
| Post subject: | Re: |
Willie Goldman wrote: Nick, hey, maybe we should try and figure something out - I can find a way to ship these to you if you're interested... PM sent!
|
|
| Author: | elementry [ Sun Jun 19, 2016 4:58 pm ] |
| Post subject: | |
I would be interested in ordering floor tiles and supports if this becomes a run. |
|
| Author: | shelby [ Tue Jun 21, 2016 6:44 am ] |
| Post subject: | Re: NECA & Hot Toys scaled wall panels |
Definitely be interested as well |
|
| Author: | Bravomite [ Tue Jun 21, 2016 1:57 pm ] |
| Post subject: | |
Sounds very cool and I am definitely interested in both 1/6 scale and neca scale diorama pieces. |
|
| Author: | bigbisont [ Tue Jun 21, 2016 2:05 pm ] |
| Post subject: | |
Willie, you mind if I post these images in an "interest" thread over on the SSF forum? Lots of figure fans over there that don't frequent here for some reason. I think you will get a good response and drum up interested buyers pretty quick. |
|
| Author: | Willie Goldman [ Tue Jun 21, 2016 5:21 pm ] |
| Post subject: | |
Of course, totally fine - I'm sure the Star Wars crowd will dig the pallet as well. We're currently on the hunt for a higher res printer to minimize clean up... |
|
| Author: | bigbisont [ Tue Jun 21, 2016 6:34 pm ] |
| Post subject: | Re: NECA & Hot Toys scaled wall panels |
Willie, this is what I slapped together. Were you on the SSF? http://www.sideshowcollectors.com/forum ... ost8692774 Please let me know if you want me to edit or change anything (be it inaccurate info/content or even not the 'tone' you wanted presented). |
|
| Author: | Willie Goldman [ Tue Jun 21, 2016 7:36 pm ] |
| Post subject: | |
I'm not a member there - at least I don't think. I'll try and log in some way, but I'm sure it's fine... |
|
| Page 1 of 3 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|