Well, I think they would work. I don't see why they wouldn't.
Attachment:
Kango 327.jpg [ 22.79 KiB | Viewed 12789 times ]
Attachment:
Kango 422.JPG [ 186.91 KiB | Viewed 12789 times ]
| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| Other Kango drills? ... for the Motion Tracker http://forum.alienslegacy.com/viewtopic.php?f=3&t=14685 |
Page 1 of 1 |
| Author: | Andymac84 [ Mon Aug 18, 2014 5:24 pm ] |
| Post subject: | Other Kango drills? ... for the Motion Tracker |
Somethings on my mind since a few days.. Is there another Kango drill from the 400 series which could also be the base for the Motion Tracker? I would like to convert an authentic drill before seeking for a casted base. Any suggestions? |
|
| Author: | Quarax [ Mon Aug 18, 2014 6:50 pm ] |
| Post subject: | Re: Other Kango drills? ... for the Motion Tracker |
The 327 and 422 should also work, but they have slightly different selector switches. |
|
| Author: | Andymac84 [ Mon Aug 18, 2014 7:37 pm ] |
| Post subject: | Re: Other Kango drills? ... for the Motion Tracker |
Thank you. That sounds good. It's still hard to find one but there's probably a better chance in finding one out of three, rather than finding the correct one. |
|
| Author: | Quarax [ Mon Aug 18, 2014 7:40 pm ] |
| Post subject: | Re: Other Kango drills? ... for the Motion Tracker |
Noble has a 426 for sale right now, actually. |
|
| Author: | Andymac84 [ Mon Aug 18, 2014 7:44 pm ] |
| Post subject: | |
And what about other firms? |
|
| Author: | Andymac84 [ Mon Aug 18, 2014 7:45 pm ] |
| Post subject: | |
I'll check nobles listing. Hope I find it:) |
|
| Author: | zachilles [ Mon Aug 18, 2014 8:58 pm ] |
| Post subject: | Re: Other Kango drills? ... for the Motion Tracker |
Quarax wrote: Noble has a 426 for sale right now, actually. Just sent you a PM |
|
| Author: | zachilles [ Mon Aug 18, 2014 8:58 pm ] |
| Post subject: | Re: Other Kango drills? ... for the Motion Tracker |
Quarax wrote: The 327 and 422 should also work, but they have slightly different selector switches. Didn't know a 422 could work. Interesting. |
|
| Author: | Andymac84 [ Wed Aug 20, 2014 6:38 pm ] |
| Post subject: | |
Didn't knew this, too. But I thought they've probably the same bases for their drills within a series. I'm glad they didn't used the Binford 6100 series.. those are rare;) |
|
| Author: | Quarax [ Thu Aug 21, 2014 12:35 am ] |
| Post subject: | Re: Other Kango drills? ... for the Motion Tracker |
Well, I think they would work. I don't see why they wouldn't. Attachment: Kango 327.jpg [ 22.79 KiB | Viewed 12789 times ] Attachment: Kango 422.JPG [ 186.91 KiB | Viewed 12789 times ] |
|
| Author: | Andymac84 [ Tue Aug 26, 2014 10:44 am ] |
| Post subject: | |
That's awesome. They're probably cheaper, too. Is the 426 definitive the screen used model? |
|
| Author: | Quarax [ Tue Aug 26, 2014 7:54 pm ] |
| Post subject: | Re: |
Andymac84 wrote: That's awesome. They're probably cheaper, too. Is the 426 definitive the screen used model? Yeah, the screen-used props have the straighter selector switch that the 426 has. |
|
| Author: | Quarax [ Fri Nov 14, 2014 5:23 pm ] |
| Post subject: | Re: Other Kango drills? ... for the Motion Tracker |
There was an auction for a Kango 422 recently (sold for only 21.5 Euros), and one of the pictures showed that the 422 does have the right switch. Attachment: IMG_7559.jpg [ 224.57 KiB | Viewed 12491 times ] However, it seems like the trigger is different from the 426's (and I believe the prop's); it's got a "bump" in it. I wish we had better pictures of it. Attachment: IMG_7556.jpg [ 261.32 KiB | Viewed 12491 times ] Attachment: IMG_7557.jpg [ 246.57 KiB | Viewed 12491 times ] |
|
| Author: | zachilles [ Fri Nov 14, 2014 6:16 pm ] |
| Post subject: | |
I just saw this one on ebay. Is this what you are referring to? Thought I would share to the community.  http://www.ebay.co.uk/itm/KANGO-422-SDS ... c#shpCntId |
|
| Author: | Quarax [ Fri Nov 14, 2014 8:30 pm ] |
| Post subject: | Re: |
zachilles wrote: I just saw this one on ebay. Is this what you are referring to? Thought I would share to the community. http://www.ebay.co.uk/itm/KANGO-422-SDS ... c#shpCntId No, the one I posted already sold. I did see that one earlier; it's got the black box that Willie pointed out was used as set dressing in Hadley's Hope, but the trigger's wrong. Attachment: Black Kango 422 Box.jpg [ 259.69 KiB | Viewed 12471 times ] Attachment: operations5.jpg [ 529.75 KiB | Viewed 12471 times ] |
|
| Author: | Quarax [ Fri Nov 14, 2014 10:23 pm ] |
| Post subject: | Re: Other Kango drills? ... for the Motion Tracker |
Actually, after looking at the pictures of the 422 again, it seems like that bump is just damage. However, I looked at some pictures of the MT on display at SDCC, and it looks way too bright to be a 422. Attachment: MT Paint Wear.jpg [ 417 KiB | Viewed 12462 times ] Here's some Kango 426 pictures for comparison. Attachment: Kango 426 in Box.jpg [ 127.63 KiB | Viewed 12462 times ] Attachment: Kango 426 3.jpg [ 460.97 KiB | Viewed 12462 times ] Attachment: Andy's Kango 426.jpg [ 172.55 KiB | Viewed 12462 times ] It could just be a lighting thing, but all pictures I've seen of the 422 show it to be far darker. Attachment: Kango 422 and Box.jpg [ 252.75 KiB | Viewed 12462 times ] |
|
| Author: | Quarax [ Sat Nov 15, 2014 6:02 am ] |
| Post subject: | Re: Other Kango drills? ... for the Motion Tracker |
After looking at some of Willie's pictures of the MT, it's pretty obvious they used Kango 426. Attachment: motiontracker3medium.jpg [ 397.71 KiB | Viewed 12446 times ] Attachment: motiontracker2medium.jpg [ 369.64 KiB | Viewed 12446 times ] |
|
| Author: | GermanGhosthead [ Tue Nov 18, 2014 4:53 pm ] |
| Post subject: | |
I have grabbed the Kango 422 of ebay. And you are right, the trigger is indeed damaged and slightly different from the 426. But it is an awsome budget start for a motion tracker. |
|
| Author: | Andymac84 [ Tue Nov 18, 2014 6:06 pm ] |
| Post subject: | |
Indeed. Great start at a fair price. Thanks to Quarax for pointing all the facts for us. Top |
|
| Author: | Andymac84 [ Tue Nov 18, 2014 6:07 pm ] |
| Post subject: | Re: Other Kango drills? ... for the Motion Tracker |
Quarax wrote: Actually, after looking at the pictures of the 422 again, it seems like that bump is just damage. However, I looked at some pictures of the MT on display at SDCC, and it looks way too bright to be a 422. Attachment: MT Paint Wear.jpg Oh, I have to spray my swivels in brown bess, too. 
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|