The Aliens Legacy
http://forum.alienslegacy.com/

Nerf Pulse Rifles .... who has done one and show us :)
http://forum.alienslegacy.com/viewtopic.php?f=3&t=13913		 Page 1 of 2
Author:  M41ASlinger [ Wed Dec 04, 2013 12:02 am ]
Post subject:  Nerf Pulse Rifles .... who has done one and show us :)
I am in the process of making a Nerf PR myself and was wanting to see if any/many of you guys have made one and wanted to have a look at your work (for inspiration)
Cheers,
G
Author:  SixbyFire [ Wed Dec 04, 2013 2:23 am ]
Post subject:  Re: Nerf Pulse Rifles .... who has done one and show us :)
I had originally planned on doing a pulse rifle out of a Nerf CS-6 Longshot, but after studying it and thinking about the project I figured it looked more like an incinerator, so this is the result: viewtopic.php?p=120481#p120481

Not exactly what you're looking for, but figured I'd throw that out there.

Jeff
Author:  M41ASlinger [ Wed Dec 04, 2013 5:54 am ]
Post subject: 
That looks awesome ... Great work !
I have put together a short video of my build so far if any are interested
http://youtu.be/ZlRIItU7coM
Cheers,
J
Author:  SixbyFire [ Thu Dec 05, 2013 4:47 am ]
Post subject: 
Looks pretty good with the shrouds in place!

Jeff
Author:  M41ASlinger [ Sun Dec 08, 2013 1:44 am ]
Post subject:  Re: Nerf Pulse Rifles .... who has done one and show us :)
Has no-one else built a nerf pulse rifle ?
Author:  M41ASlinger [ Mon Dec 09, 2013 1:10 am ]
Post subject:  Re: Nerf Pulse Rifles .... who has done one and show us :)
I thought I would share some pics of work so far.
Image

Image

Image

Image

Image

Image

Image

Image
Author:  retrogarde [ Mon Dec 09, 2013 5:41 pm ]
Post subject: 
That's looking really good! May I ask where your template came from for the shrouds?
Author:  M41ASlinger [ Tue Dec 10, 2013 4:49 am ]
Post subject: 
I used these templates that A guy Named "Quest" on the RPF put up a link to :
http://mobiusdesigns.com/nerf/Nerf_pulse_rifle.rar
Author:  retrogarde [ Tue Dec 10, 2013 11:22 am ]
Post subject: 
Thanks!
Author:  M41ASlinger [ Fri Dec 13, 2013 12:18 am ]
Post subject: 
I made a little more progress last night
Image

I cut the trigger down so it looks more like a real trigger from the outside and installed the trigger micro switch.
Image

Really starting to take shape now :)
Image

Cheers.
Author:  Trigger happy [ Fri Dec 13, 2013 2:31 am ]
Post subject: 
looking good. Amazing what some scrap plastic and a toy gun can be turned into.
Author:  MattRendar [ Fri Dec 13, 2013 4:10 am ]
Post subject: 
Great work !! Can't wait to see it finished
Author:  M41ASlinger [ Mon Dec 16, 2013 7:07 am ]
Post subject: 
here is a little update video for your viewing pleasure ;)

http://www.youtube.com/watch?v=ni0v0qyVddw
Author:  M41ASlinger [ Tue Dec 17, 2013 5:56 am ]
Post subject: 
Well I'm almost there :D
Just iron out the bugs and finish a few little bits and I'm done !
Image

Image

Image
Author:  Moosh89 [ Tue Dec 17, 2013 8:21 am ]
Post subject: 
a thing of beauty!

Gahhh! I really wish I knew how to use styrene like that! I want to make smaller shrouds and a smaller receiver, but I've never built anything with styrene... nice work!
Author:  M41ASlinger [ Tue Dec 17, 2013 11:16 pm ]
Post subject: 
Thanks Moosh :)
This is the first thing I have made using styrene (ABS) also ... surprisingly, It wasn't as bad as I thought it would be.
Author:  SGT KITTEN [ Wed Dec 18, 2013 2:44 am ]
Post subject: 
Looks really nice! One of the better Nerf builds I've seen. If I may make one small suggestions, on the left-hand side of the rifle (as you hold it), fill in the screw holes. I've used bondo, and then sanded smooth and repainted. Some of the them wouldn't be bad to leave as is, but there looks like a big difference in the numbers between the sides. Still great work with the styrene!

Charlie
Author:  M41ASlinger [ Wed Dec 18, 2013 3:14 am ]
Post subject: 
Hey Kitten,
I had thought of doing that but the problem is it renders it unserviceable.
If a led blows or a component breaks etc I wouldn't be able to open the gun to fix it.
Maybe there is a non permanent way I could do it ? ... I will look into it :)
Cheers,
Slinger
Author:  SGT KITTEN [ Wed Dec 18, 2013 3:17 am ]
Post subject: 
Ah, I can see how that might pose a problem then. The good point would be since all the screws are on the left side, holding the rifle "at the ready" would put that side against your chest (if you're right handed) and they wouldn't be seen most of the time.

Charlie
Author:  M41ASlinger [ Wed Dec 18, 2013 3:54 am ]
Post subject: 
LOL ... I thought the exact same thing .... I could plug and cover the few holes that are on the right side so there would be none on 1 side, the exposed side which would probably be a good idea.
Cheers,
Author:  M41ASlinger [ Mon Jan 06, 2014 1:33 am ]
Post subject: 
Well .... It's finally finished ! :D
Hope you like it ....

Link to demo video : http://www.youtube.com/watch?v=lQv-7CHVQpM
Author:  SixbyFire [ Mon Jan 06, 2014 8:04 am ]
Post subject: 
Wow, I figured it wouldn't "Nerf" anymore after being modded, but it still works as a Nerf gun, plus the lights and sound effects, that's pretty awesome!

Jeff
Author:  577_ops [ Mon Jan 06, 2014 4:00 pm ]
Post subject:  Re: Nerf Pulse Rifles .... who has done one and show us :)
Your Nerf PR is great!
The electronics/FX/SND/weathering/... all done very well.

Thanks for sharing!
Author:  retrogarde [ Mon Jan 06, 2014 6:12 pm ]
Post subject: 
This really looks (and sounds!) amazing. The only thing I might suggest (and you can tell me to stuff it) is filling in the hole in the bottom of the grip. That's the only remaining "Nerf" detail that catches my eye, the rest of it looks absolutely in keeping with the Pulse Rifle we know and love. Bravo!
Author:  SGM Baldwin [ Fri Jan 10, 2014 7:45 am ]
Post subject:  Re: Nerf Pulse Rifles .... who has done one and show us :)
Good looking mod. Well done.
Page 1 of 2 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/