The Aliens Legacy http://forum.alienslegacy.com/ |
|
Weyland Yutani PMC Armour Project http://forum.alienslegacy.com/viewtopic.php?f=3&t=13371 |
Page 1 of 1 |
Author: | Moosh89 [ Tue Jul 16, 2013 6:06 am ] |
Post subject: | Weyland Yutani PMC Armour Project |
Hey friends! I've been working on a few armour related 3D projects. It's slow going but I decided to undertake a special task. Here is a small teaser: Attachment: Progress 1.png [ 10.27 KiB | Viewed 14953 times ] Pretty obscure, Only some of you might catch it by the ridge ![]() Anyway, I need to know the general size of measurements from the neck to the bottom of the belly of the CM armour, as well as general width at the ribs, depth of the chest piece and thickness of the armour. Also the size of the holes where the strapping should go. As this progresses I will add to this thread, as well as any more questions I may have along the way Thanks!! |
Author: | Willie Goldman [ Tue Jul 16, 2013 6:55 am ] |
Post subject: | |
I feel like there was a set of these with measurements around here somewhere: viewtopic.php?f=8&t=12768 |
Author: | Adie1979 [ Tue Jul 16, 2013 10:13 am ] |
Post subject: | Re: Armour owners, May I get some measurements please? |
Didn't someone else awhile ago post some CAD (or similar) drawings, might be worth trawling through the posts to see |
Author: | Chef [ Tue Jul 16, 2013 1:38 pm ] |
Post subject: | |
What do you need Moosh, I'll go and measure a set for you. Just drop me a PM with what you need. |
Author: | Moosh89 [ Tue Jul 16, 2013 8:42 pm ] |
Post subject: | |
Thanks everyone! Unfortunately those templates aren't quite what I am looking for, so Chef, I will be PMing you shortly, Thanks so much! In the meantime here's another progress picture! ![]() Attachment:
|
Author: | Adie1979 [ Tue Jul 16, 2013 9:18 pm ] |
Post subject: | |
What's the plan when u have said measurements? |
Author: | Moosh89 [ Tue Jul 16, 2013 9:51 pm ] |
Post subject: | |
Hopefully Pepakura files and maybe 1/6th scale ![]() Care to guess which armour this is? haha |
Author: | bigbisont [ Tue Jul 16, 2013 9:54 pm ] |
Post subject: | Re: |
Moosh89 wrote: Hopefully Pepakura files and maybe 1/6th scale ![]() Care to guess which armour this is? haha A:CM Weyland Yutani dudes! (As a side note, could probably be the Rebellion AvP marine armor as well. I have a theory they tried to mix traditional colonial marine M3 armor with the 'more futuristic' look of the latest Aliens Vs. Predator Video game marines. I think it was a good idea. Like the WY guys had the latest versions of the armor which would later be adopted by the marines. But that is just me speculating on a topic no one particularly will ever care about!) |
Author: | Moosh89 [ Tue Jul 16, 2013 10:22 pm ] |
Post subject: | |
Bingo! I literally have no idea what I'm doing though haha, this is all trial and error... I'm just going til it looks like something ![]() I bought the Pepakura Designer program so I figured I should try something with it. Granted it should have been something "simple" but I like a challenge and this is a great community full of helpful people ![]() The PMC helmets look cool, those will be last however ![]() |
Author: | Winch [ Tue Jul 16, 2013 10:28 pm ] |
Post subject: | Re: Armour owners, May I get some measurements please? |
I don't want to rain on your parade Moosh but you do know there are already Pepakura plans for Colonial Marine Armour available for download? ![]() |
Author: | Moosh89 [ Tue Jul 16, 2013 10:39 pm ] |
Post subject: | |
This isn't Colonial Marine armour haha. It is the Weyland Yutani PMC armour from A:CM. I've only asked for the measurements of Colonial Marine armour for reference since both armour types cover the same area ![]() I actually have the Colonial Marine armour pep files but I can't figure out how big it actually is haha. ![]() Changed the thread title since bigbisont correctly guessed what it is, and to avoid confusion ![]() Another progress picture: Attachment:
|
Author: | PVB [ Tue Jul 16, 2013 10:55 pm ] |
Post subject: | Re: Weyland Yutani PMC Armour Project |
The armour made from the pep files tend to be too large and deep, so best to start anew. ![]() One of our female Marines at LFCC had a chest armour more like the A:CM stuff, so will give her the heads up about your project. ![]() |
Author: | 88reaper88 [ Wed Jul 17, 2013 12:15 am ] |
Post subject: | Re: Weyland Yutani PMC Armour Project |
PVB wrote: The armour made from the pep files tend to be too large and deep, so best to start anew. ![]() That actually depends on the part, the front plate normally comes out more like a bra and the back like a sleeping bag ![]() Moosh: If you want a hand with the unfolding then give me a shout, I'm happy to help out ![]() |
Author: | Moosh89 [ Wed Jul 17, 2013 12:18 am ] |
Post subject: | |
I will reaper! Maybe you can be my tester? ![]() |
Author: | .B. [ Wed Jul 17, 2013 9:01 am ] |
Post subject: | Re: Weyland Yutani PMC Armour Project |
PVB wrote: The armour made from the pep files tend to be too large and deep, so best to start anew. ![]() One of our female Marines at LFCC had a chest armour more like the A:CM stuff, so will give her the heads up about your project. ![]() ^ I am said female Marine - so hi Moosh! Below is a photo of my chestplate (Terry English, lightweight aluminium) ![]() I'm 5'4, UK size 12 and it fits beautifully (although I will probably need to re-fit a strap to better hold it in place on the left hand side!) This is the clearest photo of me wearing it I could find: ![]() If I can be of any use to your project, let me know ![]() |
Author: | MattRendar [ Wed Jul 17, 2013 12:09 pm ] |
Post subject: | |
great armor! |
Author: | Vito [ Wed Jul 17, 2013 1:22 pm ] |
Post subject: | |
Great picture, Beth. -Callum |
Author: | .B. [ Wed Jul 17, 2013 1:46 pm ] |
Post subject: | |
Thanks guys - very proud!! ![]() |
Author: | 88reaper88 [ Wed Jul 17, 2013 1:49 pm ] |
Post subject: | |
Remember you can change the size in Pepakura Designer so it doesn't really matter what size your original model is ![]() |
Author: | retrogarde [ Wed Jul 17, 2013 3:48 pm ] |
Post subject: | |
Cool armour .B. and crazy how much that guy in your picture looks like Neo! |
Author: | .B. [ Wed Jul 17, 2013 4:50 pm ] |
Post subject: | Re: |
retrogarde wrote: Cool armour .B. and crazy how much that guy in your picture looks like Neo! Cheers! Yeah - I totally did a double take! Was just browsing the stalls at LFCC and glanced left and my heart nearly stopped! |
Author: | Moosh89 [ Wed Jul 17, 2013 6:52 pm ] |
Post subject: | |
Hey Beth! Thanks for popping in!! Your armour looks awesome!! Great picture! and your avatar is BAD... ASS! Just a small update ![]() Started going back and cleaning up my meshes so it unfolds nicely. Still need to do the back and each shoulder and maybe the shoulder lamp. I really want to do the "Helmet PMC"s helmet too, that'd be cool!. Chef was kind enough to give me some great measurements of a set of his custom made stuff ![]() Thank you all so so much for the help, and you can bet I will be calling on you all again shortly! |
Author: | Major Gunn [ Thu Jul 18, 2013 4:21 pm ] |
Post subject: | |
Ah, the corporates...gotta love em! ![]() |
Author: | John38 [ Wed Jan 01, 2014 3:43 pm ] |
Post subject: | |
Anything more come of this? I would like to see some WY PMC's! |
Author: | Moosh89 [ Wed Jan 01, 2014 4:28 pm ] |
Post subject: | |
Just started back into modelling, I'm bad for starting stuff and leaving it for awhile, due to my fluctuating energy levels. It's coming! I believe I just have the shoulders left to do. Maybe reaper can give me a crash course on using Pepakura Designer as well ![]() |
Page 1 of 1 | All times are UTC [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |