I cannot help you in the slightest but I'll be looking forward to this thread growing
Hasn't Bob Burns got the original one?
| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| Aliens JORDAN tractor http://forum.alienslegacy.com/viewtopic.php?f=3&t=12922 |
Page 1 of 1 |
| Author: | marsattack [ Sun Apr 14, 2013 1:06 am ] |
| Post subject: | Aliens JORDAN tractor |
Hi folks , as some may know I have been also involved in studio scaling for a while over at the RPF. Searching through the web I found a picture of the Jordan tractor , I believe this was used in the aliens movie as the "family vehicle" In LV 426. Now I am not stating anything here and by far not stating a claim of doing any sort of kit ATM, But I would like to know if there is any info on the actual base kit that was used to make that? Caterpillar has a Jordan tractor but its not quite it. Any info sharing here could very well lead into some tremendous kit building ..... That is how it's done. I only Have one picture which I have a few guys looking at it to see if they can identify kit donors. I haven't yet sat down and broken apart the studio scale kit. I am also unsure if this was ever touched before as I am too lazy to do a search. It's a long term thing so the more involved the better the possibilities. Thank you all for now Marcel |
|
| Author: | 88reaper88 [ Sun Apr 14, 2013 1:45 am ] |
| Post subject: | |
I cannot help you in the slightest but I'll be looking forward to this thread growing Hasn't Bob Burns got the original one? |
|
| Author: | PVB [ Sun Apr 14, 2013 10:56 am ] |
| Post subject: | Re: Aliens JORDAN tractor |
Note: Newt's family name is Jorden, not Jordan.  Looking on Google, lots of people spell it incorrectly, which doesn't help when searching for info. 
|
|
| Author: | Harry Harris [ Sun Apr 14, 2013 2:10 pm ] |
| Post subject: | |
I have original blueprints of the Jorden tractor that were used by the model unit to make the radio-controlled miniature version and for the construction of the full-scale static version that the family are seen to use. I also have some good images of the model taken outdoors in the car park at Pinewood. As far as I know most of the model, apart from the outside dressing details (there's a gardener's seed/planting tray on the roof for example) was built from scratch. Mars if you're serious about making an accurate kit of this drop me a line, I'd be happy to share the plans with you and as always all I ask is that I be sent a kit when it's available. Harry |
|
| Author: | marsattack [ Sun Apr 14, 2013 3:17 pm ] |
| Post subject: | Re: Aliens JORDAN tractor |
Fellas, Reaper thanks anyways, Pvb amazing what one letter can do, And Harry you have way too much faith in me !!!! A kit? Well I can try if you say they were scratchbuilt.... I will pm you shortly about it. If there's is anything anyone can see that it may be a found item or a kit part please say. Even if its a similar item , it gets the mind rolling into another direction. Thank you Mars |
|
| Author: | marsattack [ Sun Apr 14, 2013 3:30 pm ] |
| Post subject: | Re: Aliens JORDAN tractor |
Ok from Harry's observation of the seed crate and those outside car park pictures, it puts the studio scale remote control at a huge 4 or 5 feet long. I don't know if there was a smaller version but this size is just too big . I can down scale it to a more "shelf" piece. |
|
| Author: | Glenn [ Sun Apr 14, 2013 6:49 pm ] |
| Post subject: | Re: Aliens JORDAN tractor |
I tried scatch building this many years ago i 2 thirds of the way through the build before giving up ( i got lazy ) plus i built the main body carved out of balsa wood , because of the odd shape , if i was to build it now i would more likely use plastic card or something like that .. |
|
| Author: | retrogarde [ Sun Apr 14, 2013 9:35 pm ] |
| Post subject: | |
Funny, I was considering trying to build one of these from scratch as well! There are a lot of photos of it on the Aliens DVD, and mention of the fact that it raised and lowered. The lifesize version was built in the down position, while the model was in the up position, and although we never see it lower, no one seems to complain about the difference. |
|
| Author: | marsattack [ Mon Apr 15, 2013 2:49 am ] |
| Post subject: | Re: Aliens JORDAN tractor |
At a glance , although it may have been all scratched built I do see some resemblance to found items thrown together. There a a thousands of these toys and all in large scales , but I just copied this to inspire some of you to look further. http://www.vectis.co.uk/Page/ViewLot.as ... ction=2065 Looks like a dump truck rear bucket upside down for the upper section. Even if we do a smaller scale its good to see what the real items would of looked like. |
|
| Author: | retrogarde [ Mon Apr 15, 2013 11:21 am ] |
| Post subject: | |
Harry: I just noticed that my amazing factoid about the tractor was already documented on your site. Also, I'd never noticed the planting tray before, and now that's all I can see! Kinda like the ice cube tray on the MT in Alien... |
|
| Author: | timeslip [ Mon Apr 15, 2013 8:14 pm ] |
| Post subject: | Re: Aliens JORDAN tractor |
A 1/35 scale tractor is already in the works. SRS Prototyping is doing it. He should have it done by the summer. george |
|
| Author: | Harry Harris [ Mon Apr 15, 2013 10:17 pm ] |
| Post subject: | Re: Aliens JORDAN tractor |
timeslip wrote: A 1/35 scale tractor is already in the works. SRS Prototyping is doing it. He should have it done by the summer. george How accurate will this be George? I would have been happy to help them out had I known, but I guess as they've already started its too late to make changes now. Harry |
|
| Author: | marsattack [ Mon Apr 15, 2013 10:57 pm ] |
| Post subject: | |
That is freat news! How big and would you be kind to post the announcement link? Just want to read on how it's been designed . Hopefully it's summer of 2013. Mars |
|
| Author: | timeslip [ Tue Apr 16, 2013 3:48 pm ] |
| Post subject: | Re: Aliens JORDAN tractor |
Right on accurate. Thanks to a little birdie from this board. I don't know the size. I'll jit him up later today and get more info.George |
|
| Author: | PVB [ Tue Apr 16, 2013 4:30 pm ] | ||
| Post subject: | Re: Aliens JORDAN tractor | ||
timeslip wrote: Right on accurate. Thanks to a little birdie from this board. I don't know the size. I'll jit him up later today and get more info.George Going by the scale you posted (1/35) and guessing that the cab is about six feet tall in the 1/1 tractor (about the same size as the wheels), the model would likely be about six inches tall:
|
|||
| Author: | Willie Goldman [ Sun May 26, 2013 4:37 am ] |
| Post subject: | Re: Aliens JORDAN tractor |
   
|
|
| Author: | Willie Goldman [ Sun May 26, 2013 4:37 am ] |
| Post subject: | Re: Aliens JORDAN tractor |
|
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|