Hi guys. I'm sure most of you don't remember me. Its been quite some time sense I have been over here.

I usually make Trek props, but I started a little side project. I finally won the bidding war on one of these, and figured it needed to be replicated, as these are not an easy base to find these days. I'll post more pictures when they become avaliable.

_________________
What ever tape you found in that VCR isn't mine.

I also have made some graphics. Suggestions welcome...

_________________
What ever tape you found in that VCR isn't mine.

OOOOOOOOOOOOOOOOOOOOOOOOOOO. i cant wait if you sell these i will be very interested for at least 2.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

I figured there might be a little interest in this. After I get one cast that I am happy with. I will get some lenses laser cut, and print the graphics. I haven't figured out the strap yet. I will try to make this a complete kit, but that may be my stumbling block. My talent is the plastic bits. lol!!!

_________________
What ever tape you found in that VCR isn't mine.

all good just cant wait even if its raw kits thats kool.with out the strap

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

I can send you my graphics file, I won't be making these anymore.


I suggest molding the gasket around the glass with the watch body.


As for the strap, it is 22mm webbing. I have connections with factories, so they made me some.


I have a roll left from my version 1 watch strap that you are welcome to have.

i was goin to grab 0ne from you noble but when i went to get your info you had just closed orders like a few days before. i was pissed. thats y im so glad this shown up.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

Thank you for the offer. I will be messaging you soon.

_________________
What ever tape you found in that VCR isn't mine.

Hi Dude I remember you long time no see i will follow this one with interest all the best mate Rob

_________________
diamond geezer
The Turtle Moves

I remember you too. The teacher of London slang. lol!!

"sorry about moniker its the cockney coming out in me propper gor blimey "down the apples along the frog in me best whistle and dasies"

_________________
What ever tape you found in that VCR isn't mine.

Wondering how the molding and cast of these are coming. like before very glad some1 is doing these again

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

Very close. I have 10 watch kits ready. Just trying to hammer out a few small details before I can start making them available. I'll try to get more pictures tomorrow to post.

_________________
What ever tape you found in that VCR isn't mine.

put me down for 2 lol you have any clue on a price yet? and i cant wait.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

My guess at this point is 35.00 plus shipping.

Here is what I have so far.



Here is a couple of builds with the kit, and Noble's straps.

_________________
What ever tape you found in that VCR isn't mine.

Very nice like i said im very interested in these. Im working on the Tracker tube right now painting up 3 casts right now.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

If thats the best you can do you should be ashamed to post it on this site, send them to me for immediate disposal and we will say no more on the matter Well hard dude i would expect nothing else from you great attention to detail you are a credit to the forum. all the best mate Rob

_________________
diamond geezer
The Turtle Moves

Put me on the list for one unit as well !

Looking great. Put me on the list for two units.

_________________
Sgt. Frank Peters 'reload' Smartgun Operator
A03/TQ3.0.12136E1 "It will be no picknick!"
AL Colonial Admin. - Sergeant at Arms (SgtA) -- 2020-2022
GERCM - Executive Officer (XO)
UKCM Foreign Legion: The Deviant Dragoons

I'll get them out too you for disposal as soon as I can. Just remember shipping is Very Very Very slow these days. You will be lucky if they ever show up.

I should be able to post these in a sale thread in the next few days.

Myron

_________________
What ever tape you found in that VCR isn't mine.

i so cant wait like i said i will be getting 2 so they can go with the tracker tube im making. damn window is whats killing me right now.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

What's going on with the window? Maybe I can help.

_________________
What ever tape you found in that VCR isn't mine.

first off i hate clear casting resin. but its jsut trying to mold it so its perfect is a pain. so im trying to cast up a few in Smooth-on and clean it up and then remold it so i have 6 instead of 1.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

The only way I have found to cast clear so that it turns out nice is to pressure cast it. That is actually how I am doing these watch bodies. They are tinted clear resin. I use this stuff. It is destructive on molds, but makes a really nice clear part. It does need to be pressure cast however or you get small bubbles in it.
http://www.ebay.com/itm/EPOXY-RESIN-CRY ... 48386319ba

_________________
What ever tape you found in that VCR isn't mine.

damn wish i had a pressure cast set up. just sucks the stuff i have has a 16 hour cure time. i hope when i remold the long strip of htem they work better and can what i need for them.

_________________
SGT Chris Kraemer "BIRD"
S/N: A07/TQ0.0.82154G1 Sgt Kraemer

Awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

1 kit for me please.

Thanks