| The Aliens Legacy http://forum.alienslegacy.com/ |
|
| Smartgunner build. http://forum.alienslegacy.com/viewtopic.php?f=3&t=12030 |
Page 1 of 2 |
| Author: | cosmo_kraemer [ Fri Sep 28, 2012 5:04 am ] |
| Post subject: | Smartgunner build. |
Well i figured i would start the thread for my wifes SG build. i hope some point soon she will take over the thread but i have made up the first chest plate, its jsut in the first stage still i will bondo and glass the hell out of it. but here are the pix and i will post pix of the gun when i have progress done still cleaning up the cast since its a GA gun......(yes i know alreadyand if any1 has pix of there GA build plz post them)  
|
|
| Author: | MattRendar [ Fri Sep 28, 2012 5:34 am ] |
| Post subject: | |
Looking good! |
|
| Author: | cosmo_kraemer [ Fri Sep 28, 2012 5:35 am ] |
| Post subject: | |
thanks do you think the size looks good for us both. its her build but if i can vac form the chest and we both can use it that would be so great. and im sitting on the floor wet sanding the main receiver for the M56. |
|
| Author: | MattRendar [ Fri Sep 28, 2012 7:37 am ] |
| Post subject: | |
If you vac form those I'd be definately interested in one. Keep us posted. |
|
| Author: | punkmarine [ Fri Sep 28, 2012 12:54 pm ] |
| Post subject: | |
I'm no expert on these, but I'd say they were possibly a little too big. At there widest points they seem to be wider than your actual chests (especially on the wife) and may affect your arm/shoulder movements. Martin |
|
| Author: | cosmo_kraemer [ Fri Sep 28, 2012 1:20 pm ] |
| Post subject: | |
thanks alot for the feed back. now i we can get a Smartgunner to comment here that would be great just to let us know when it starts and stops on ur chest i know Vaz her chest is covered almost all the was in the film. |
|
| Author: | bigbisont [ Fri Sep 28, 2012 1:37 pm ] |
| Post subject: | Re: |
punkmarine wrote: I'm no expert on these, but I'd say they were possibly a little too big. At there widest points they seem to be wider than your actual chests (especially on the wife) and may affect your arm/shoulder movements. Martin I really dont want to get known as the "make em smaller" guy...I think everyone keeps making them too big! http://www.imfdb.org/images/thumb/0/02/ ... NS-M16.jpg The actual plate is only ~half the bulk of the rig. But to each their own preference. |
|
| Author: | 25-Serria [ Fri Sep 28, 2012 2:13 pm ] |
| Post subject: | |
ive got a large sized chest plate from Matsou and love it. it looks better when its bigger i think. but like bigbisont said, personal preferance. |
|
| Author: | cosmo_kraemer [ Fri Sep 28, 2012 2:54 pm ] |
| Post subject: | |
ok so im taking it as on me it looks ok but i should make a smaller one for the wife will do that this weekend. but this build will be funny cuz she is only 5'4" she will be one of the shortest SG's here i think. and last night i spent a good 3-4 hours drilling holes into the SG kit i have so i can add metal rods for strength.hey 25-serria where does ur chest start and stop on urself that would be a huge help. |
|
| Author: | 25-Serria [ Fri Sep 28, 2012 6:24 pm ] |
| Post subject: | |
at work so dont have access to my gear. ill throw it on tongiht and find out for ya. |
|
| Author: | cosmo_kraemer [ Fri Sep 28, 2012 6:37 pm ] |
| Post subject: | |
thanks alot im at work myself. i also hope tonight to have pix of the smartgun on how its goin. and still its not the greatest gun i make my wife cry when i show her Matsuo's gun lol. but for the price we could not pass up the gun.(and no we did not pay no where near the price GA asks.) |
|
| Author: | cosmo_kraemer [ Sat Sep 29, 2012 7:43 am ] | ||
| Post subject: | |||
Well after a day well spent here is the SG so far. i am having issues on just where the footpeg supports go and just were the holes are drilled. and also wondering how i will mount the forward grip and have it hold the weight thinking a steel pipe and drilling into the body. any idea's on what other Gunners have done would help alot.
|
|||
| Author: | cosmo_kraemer [ Thu Oct 04, 2012 12:06 am ] |
| Post subject: | |
Well today in the mail was the left light and horn controler off of a 1984 Kawasaki GPz750. just opened it up and cleaned it all up so it moves alot easier. also got an HT1 at work that is welding up a metal front grip for the wifes gun. just need to mount the footpeg struts and the camrea and clean up the drum mag and attach that and the feeder. so this gun is coming along pretty good and also need to get the right foam grips tryin to go as real as i can with what i got. so glad the wife is loving her gun and will post pix when i get the grip mounted. Any help with ideas and PIX of how any other Smart Guns are built would be great. and no have not amde the new chest for the wife yet. |
|
| Author: | cosmo_kraemer [ Sun Oct 07, 2012 6:43 am ] |
| Post subject: | |
ok well made the new chest for the wife but i think its to small now what you all think? and work on the SG has been slow got the front grip mounted and its great havin a metal one on theere. should be done soon i hope..  Uploaded with ImageShack.us |
|
| Author: | 88reaper88 [ Tue Oct 09, 2012 10:42 am ] |
| Post subject: | |
I think the size of it should relate to how tall your wife is. The armour looks tiny on Drake but looks huge on Vasquez. |
|
| Author: | cosmo_kraemer [ Tue Oct 09, 2012 8:44 pm ] |
| Post subject: | |
Thanks Reaper i will be making another one this weekend since i need to get paid so i can get more posterboard. but the SG is still at the last stage i said i still would like to see how and were one of our Smartgunners has mounted the barrel shroud(foot pegs) on the gun that is really the only thing that needs to be mounted i have an idea but want to be sure before i do so. and mounting i will epoxy and peg them on like i did most parts. |
|
| Author: | MattRendar [ Tue Oct 09, 2012 11:00 pm ] |
| Post subject: | |
Sorry i wasn't able to post those pics for you. My computers at the geek squad at best buy for cleaning. As soon as it comes back ill post picks of the front of my golden armor smart gun. Sorry about the delay. |
|
| Author: | cosmo_kraemer [ Tue Oct 09, 2012 11:47 pm ] |
| Post subject: | |
Its all good Matt i was not tryin to call you out. i have asked a few people but i know people are busy so im just waiting thats all. i figured it would have been after NYCC anyways. i have other stuff on my plate right now this build and also starting my Rifleman. and then working on film props. |
|
| Author: | cosmo_kraemer [ Sun Oct 14, 2012 2:12 am ] |
| Post subject: | |
Ok small update. grips came in and they fit perfect. need to figure out how the drum mag is to go if its striaght on level or if its slanted if someone can post a pic of theres plz do so and same with teh struts would like to have this atleast built by the end of the weekend if not the middle of next week. and the wife just ordered the Arm and Rig yesterday we were goin to get the Membo rig but she said hell with it and ordered the one most people run from India, 775 bucks later lol hope its here in a good time and not waiting long. EDIT: Well just finished the 3rd chest plate for the Wife. it seems just right to me and i have already started to Glass it. i say 1-2 more coats of Fiberglass and its ready for bondo. The chest i made first that looks right in size on me is already got some bondo on it as of now so i hope to have both primed tomorrow that is hope. would like to send in SG chest plate art to the GEARBOX Community input. |
|
| Author: | cosmo_kraemer [ Fri Oct 19, 2012 5:12 am ] |
| Post subject: | Re: Smartgunner build. |
here is a small update the gun is fully built and painted a few things i want to add later but need to get them first so what do you all think. and the PR is mine while the wife get the M56 lol.    
|
|
| Author: | MattRendar [ Fri Oct 19, 2012 6:15 am ] |
| Post subject: | |
Looking good . Could you post a pic of what you did for the toward grip. Thanks. Can't wait to see the whole thing done and ready rock. |
|
| Author: | cosmo_kraemer [ Fri Oct 19, 2012 6:31 am ] |
| Post subject: | |
u mean the fore grip if so yeha i will tomorrow when i have a chance Matt. and i owe u thanks for the pix u sent me they helped alot to finish it. |
|
| Author: | cosmo_kraemer [ Sat Oct 20, 2012 2:54 am ] |
| Post subject: | |
hope this helps you Matt if not just let me know what you reapply meant.  
|
|
| Author: | MattRendar [ Sat Oct 20, 2012 6:07 am ] |
| Post subject: | |
Is that a metal bracket or is it resin . The one that came with the kit? What khawaski grip was that again to? |
|
| Author: | cosmo_kraemer [ Sat Oct 20, 2012 6:15 pm ] |
| Post subject: | |
yes it is a metal bracket, being in the navy i had some1 at work that is a metal worker make it out of scraps. and its just screwed on i had him make it off of the one that came in the kit. Kawasaki GPZ-750 Left-hand grip they go for around 20 plus bucks on ebay. anything else just ask Matt. |
|
| Page 1 of 2 | All times are UTC [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
