The Aliens Legacy
http://forum.alienslegacy.com/

My PR is DONE.
http://forum.alienslegacy.com/viewtopic.php?f=3&t=1004		 Page 1 of 1
Author:  ja steel bonnet [ Wed Apr 18, 2007 12:20 pm ]
Post subject:  My PR is DONE.
Hi All,

Well whilst I sit tight & await the rest of my Colonial Marine gear (spat-armour & MAA 2pat) to arrive,I`ve started giving my Resin PR some TLC.

I`ve dremelled the vents out in the stock & also in the front Spas section (well 4 on each side). I`ve dremelled out the shroud to Spas body part. The 8 vents I`ve dremelled out too.Lastly just dremelled the sight in the shroud.

I`ve made 3 plates to attache to the PR & screwed them in place.
Lastly (so far) I`ve added a mount for a torch on the side of the shroud.

Still a fair bit of work to go,though wanted to show what I`ve done yesterday & this AM :D
Thinking remove the whole barrel section & place a steel/brass rod instead,redo the GL hole. Add brackets for a sling to be hooked upto it & another mount for a laser aimer.
Of course repaint the whole thing too.

Here`s the photos so far.
i77.photobucket.com/album...bo/pr1.jpg
i77.photobucket.com/album...bo/pr2.jpg
i77.photobucket.com/album...bo/pr8.jpg
i77.photobucket.com/album...bo/pr9.jpg
i77.photobucket.com/album...bo/pr4.jpg
i77.photobucket.com/album...bo/pr3.jpg
i77.photobucket.com/album...bo/pr5.jpg
i77.photobucket.com/album...bo/pr6.jpg
i77.photobucket.com/album...bo/pr7.jpg

Look forward to hearing comments.

Ja


PVT.
STEAD,J "Axeman"
A06/TQ1.0.22140E1
UKCMEdited by: [url=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=jasteelbonnet>ja steel bonnet[/url] at: 5/7/07 3:29 am
Author:  THEBUGZ [ Wed Apr 18, 2007 1:16 pm ]
Post subject:  Re: My PR & what`s it`s going through.
That is looking very good man!
Make sure you weather it good. Add in some scratch marks!

But I hope you manage to get all your armour in time mate!

Keep us posted!

Cheers

Bri;)
IN SPACE NO-ONE CAN HEAR YOU SCREAM...

[img]http://img.photobucket.com/albums/v470/bmctoonz/AlienSignature.gif[/img]
Author:  Scapey [ Wed Apr 18, 2007 6:56 pm ]
Post subject:  Re: My PR & what`s it`s going through.
Looking good!
Those plates can make all the difference to a resin PR IMHO.

Image
Author:  nickatron [ Wed Apr 18, 2007 11:11 pm ]
Post subject:  Re: My PR & what`s it`s going through.
looking great so far! are you gunna be painting the shroud brown bess? god damn i love PR's.
Author:  nimmot [ Thu Apr 19, 2007 3:12 am ]
Post subject:  Re: My PR & what`s it`s going through.
Looking great. Keep us posted with your progress.

BTW - if you are shooting for greater accuracy, the plate on the forward end of the magazine base should only have two screws. (centered horizontally) This is not too terribly important, just pointing that out.
Tom
[img]http://www.m41a.com/z_temporary/octsig.jpg[/img]
Author:  Noble [ Thu Apr 19, 2007 3:37 am ]
Post subject:  Re: My PR & what`s it`s going through.
Looking Good!

Dremeling is a blast.

You will need an additional plate on the rear
side of the magwell by the trigger.

I personally wouldn't put the rear upper plate.
It isn't necessary,and wasn't on the original ones
as far as I know.

I'd also put a small radius on all the plates.

Sweetness!
Author:  ja steel bonnet [ Thu Apr 19, 2007 10:40 am ]
Post subject:  Re: My PR & what`s it`s going through.
Thank`s guys for the kind words.

Nickatron,
As for colour of the shroud mmmmm I`m undecided to go either Brown Bess/OD or Black.
Matt`s Black PRs make it hard NOT to have that type of PR...LOL

Matt,
Damn your right about the front magwell plate & that was my intention,worse part is I`m using a ton of printout ref pics of PRs from here,your site,movie & net. I went auto on the plates & did 4 instead of as you said 2. I`ll redo the plate methinks :D
Not too sure if I`m going screen accuracy,though something akin to that with some creative touches wouldn`t hurt now ;)
Main part is make the resin PR better :D till I can afford a better PR.

Mnobles,
Thank`s mate & didn`t know that a plate was behind the magwell.I`ll toy on that idea.
Also all plates have a small radius? how small?

Again guys thank`s very much for the input & kind words.

Happy to have any other input :D

Ja
PVT.
STEAD,J "Axeman"
A06/TQ1.0.22140E1
UKCM
Author:  nimmot [ Thu Apr 19, 2007 10:58 am ]
Post subject:  Re: My PR & what`s it`s going through.
It's Tom, sir.... he's Matt. :D
Tom
[img]http://www.m41a.com/z_temporary/octsig.jpg[/img]
Author:  ja steel bonnet [ Thu Apr 19, 2007 11:00 am ]
Post subject:  Re: My PR & what`s it`s going through.
What is it private.

LOL sorry Tom.

Ja


PVT.
STEAD,J "Axeman"
A06/TQ1.0.22140E1
UKCM
Author:  BurntKona [ Thu Apr 19, 2007 11:34 am ]
Post subject:  Re: My PR & what`s it`s going through.
Nice work. Planning on doing the same on my Spulse while she is in bits being strengthened.

First I need a Dremmel...
[img]http://bk-coffeehouse.cottages.polycount.com/images/bk-sig2.png[/img]
Author:  THEBUGZ [ Thu Apr 19, 2007 11:52 am ]
Post subject:  Re: My PR & what`s it`s going through.
Quote:
Quote:First I need a Dremmel...


I got mine from B&Q for £30 mate! But check ebay 1st!;)

Bri:D
IN SPACE NO-ONE CAN HEAR YOU SCREAM...

[img]http://img.photobucket.com/albums/v470/bmctoonz/AlienSignature.gif[/img]
Author:  BurntKona [ Thu Apr 19, 2007 12:44 pm ]
Post subject:  Re: My PR & what`s it`s going through.
Yep, one is definately needed. I've a ton of latex to trim and clean for my Pred costume
Author:  THEBUGZ [ Thu Apr 19, 2007 12:55 pm ]
Post subject:  Re: My PR & what`s it`s going through.
Ah the Dremel is an excellent tool for that mate! lol

Cheers

Bri:D
IN SPACE NO-ONE CAN HEAR YOU SCREAM...

[img]http://img.photobucket.com/albums/v470/bmctoonz/AlienSignature.gif[/img]
Author:  Rook 3 [ Thu Apr 19, 2007 1:55 pm ]
Post subject:  Re: My PR & what`s it`s going through.
Is there any reason why you added the flashlight mount on the outside, rather than perhaps placing it in the "barrel" of the Grenade launcher? Just curious. Otherwise looks good!

Russ

Image
Author:  ja steel bonnet [ Thu Apr 19, 2007 4:02 pm ]
Post subject:  Re: My PR & what`s it`s going through.
Yep a dremel is a must have piece of kit :D

Russ,
Thank`s mate & the reason for the mount being attached to the shroud rather than the fore.
Well I did that to be on the side of caution. What with the dremelling the fore has taken & what not,I wanted the weight of the torch to be safe,so the shroud is it.
I`ve never used a resin item of this size before to customize,so I`m playing it safe at the moment. Though who know`s I may try fore mounting the torch someday.

I do plan on a laser aimer to be on the fore though.

Add that I do plan on getting a shoulder lamp sometime,the torch mount isn`t that important for the future,just moreso now it is....lol

Again Thank`s.

Ja
PVT.
STEAD,J "Axeman"
A06/TQ1.0.22140E1
UKCM
Author:  ja steel bonnet [ Thu Apr 19, 2007 4:10 pm ]
Post subject:  Re: My PR & what`s it`s going through.
Well next batch of photos.

I was hoping to do more alas the weather has forced me inside :(
Too dusty to do this inside & don`t have a workbench in my garage yet :( It`s full of outdoor toys & bikes,etc for the girls.

Anyway I did redo the plate on the slant foreward mag well & also added the rear plate on the magwell.
I have also sanded off the resin GL protruding bit (as you can see it wasn`t a circle shape) & cut a metal barrel to fit.

On that,which do you guys think works better,having only the protruding end of the barrel in metal or as you can see from these dry run photos,placing that whole tube in.
i77.photobucket.com/album...o/pr-5.jpg
i77.photobucket.com/album...o/pr-9.jpg
i77.photobucket.com/album...o/pr-7.jpg
i77.photobucket.com/album...o/pr-6.jpg
i77.photobucket.com/album...o/pr-4.jpg
i77.photobucket.com/album...o/pr-1.jpg
i77.photobucket.com/album...o/pr-2.jpg
i77.photobucket.com/album...o/pr-3.jpg
i77.photobucket.com/album...o/pr-8.jpg

Well please LMK what you think to the GL tube & also if that metal tube looks about right too. I think it does.

I`m currently sorting out a metal tube for the 10mm barrel whilst the weather is crappy.


Well thank`s for input so far & here`s to more :D

Ja


PVT.
STEAD,J "Axeman"
A06/TQ1.0.22140E1
UKCMEdited by: [url=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=jasteelbonnet>ja steel bonnet[/url] at: 4/20/07 2:39 pm
Author:  nickatron [ Thu Apr 19, 2007 5:06 pm ]
Post subject:  Re: My PR & what`s it`s going through.
looks damn nice so far! and i reckon putting the whole metal tube in is best. :)
Author:  ja steel bonnet [ Fri Apr 20, 2007 5:01 pm ]
Post subject:  Re: My PR & what`s it`s going through.
Well here`s another update.
Was able to get a hr or so from baby duties :D

I`ve now removed the resin 10mm barrel & done a dry fit of the metal one (needs cutting down though).

Also added more cosmetics to the shroud to look more like a Pulse rifle.

With resin barrel removed.
i77.photobucket.com/album...pulse1.jpg
i77.photobucket.com/album...ulse-2.jpg
i77.photobucket.com/album...ulse-3.jpg

Dry fit metal barrel.
i77.photobucket.com/album...ulse-4.jpg
i77.photobucket.com/album...ulse-5.jpg
i77.photobucket.com/album...ulse-6.jpg
i77.photobucket.com/album...ulse-7.jpg

Well that`s it for the Pulse at the moment.......BUT I did have time to quickly knock this up,so LMK what you think to the launcher.

Launcher & Pulse
[img]http://i77.photobucket.com/albums/j76/steelbo/launcherpulse.jpg[/img]

Launcher
[img]http://i77.photobucket.com/albums/j76/steelbo/launcher-1.jpg[/img]

Using scope attached though will do a different housing.
[img]http://i77.photobucket.com/albums/j76/steelbo/launcher-3.jpg[/img]

[img]http://i77.photobucket.com/albums/j76/steelbo/launcher-1.jpg[/img]

Bracket will hold Handgrip
[img]http://i77.photobucket.com/albums/j76/steelbo/launcher-5.jpg[/img]

So as you can see the RED section is from an old telescope (mine when I was a kid,now knackered) & the black have is a metal tube i came across & thought that would fit.

As said it needs cosmetics but hey a Launcher none the less :D

LMK what you think to both the Pulse update & the Launcher too.

Ja
PVT.
STEAD,J "Axeman"
A06/TQ1.0.22140E1
UKCMEdited by: [url=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=jasteelbonnet>ja steel bonnet[/url] at: 4/20/07 2:29 pm
Author:  ja steel bonnet [ Sun Apr 29, 2007 5:53 pm ]
Post subject:  Re: My PR & what`s it`s going through.
Well been busy with family & stuff & finally got time to play on the PR a little more :D

I`ve now secured the metal barrels in place. I`ve also cut the section for the grenades to be loaded underneath & added sling hoops. Also filled the shell with expanding foam.

Just a couple of little things then this bad girl is getting stripped & painted.Also add a silver plate to the cut out bottom.

[img]http://i77.photobucket.com/albums/j76/steelbo/family330.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/family331.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/family332.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/family333.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/family335.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/family337.jpg[/img]

Finally throught th sight I cut into the handle.
[img]http://i77.photobucket.com/albums/j76/steelbo/family338.jpg[/img]

Well love to hear your comments.

Ja
PVT.
STEAD,J "Axeman"
A06/TQ1.0.22140E1
UKCMEdited by: [url=http://p220.ezboard.com/bthealienslegacy.showUserPublicProfile?gid=jasteelbonnet>ja steel bonnet[/url] at: 4/29/07 10:54 am
Author:  Death By Mugumba [ Sun Apr 29, 2007 7:55 pm ]
Post subject:  Re: My PR & what`s it`s going through.
Looks great!
[img]http://i110.photobucket.com/albums/n81/djgiggety/United%20States%20Colonial%20Marines/Vasquezsig.jpg[/img]
Author:  ja steel bonnet [ Mon May 07, 2007 10:30 am ]
Post subject:  Re: My PR & what`s it`s going through.
Thank`s DBM,hope your going to like this too mate.

Well Tis done (bar weathering).

I look forward to hearing your comments on my first 1:1 custom work.

Here`s photos of what the Pulse originally looked like (Sorry about the bad photos).

[img]http://i37.photobucket.com/albums/e63/SteelB/ebay001.jpg[/img]
[img]http://i37.photobucket.com/albums/e63/SteelB/ebay002.jpg[/img]
[img]http://i37.photobucket.com/albums/e63/SteelB/ebay003.jpg[/img]
[img]http://i37.photobucket.com/albums/e63/SteelB/ebay004.jpg[/img]


Now for my Completed (minus weathering) PR,May I present "WETWORKS" .....

[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a1.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a2.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a3.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a004.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a005.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a006.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a007.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a008.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a011.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a012.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a013.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a014.jpg[/img]

Finally showing my Finished PR next to my next project...Reaper`s Rifle from "DOOM"

[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a015.jpg[/img]

Looking forward to hearing what you all think.

Ja
PVT.
STEAD,J "Axeman"
A06/TQ1.0.22140E1
UKCM
Author:  ja steel bonnet [ Mon May 07, 2007 1:03 pm ]
Post subject:  Re: My PR & what`s it`s going through.
Just done adding distress & her name..............

[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a016.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a017.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a020.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a018.jpg[/img]
[img]http://i77.photobucket.com/albums/j76/steelbo/m41-a019.jpg[/img]

Well I hope you like her. Cannot wait to get another PR to have all Black.

Ja
PVT.
STEAD,J "Axeman"
A06/TQ1.0.22140E1
UKCM
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/